| # Ceres Solver - A fast non-linear least squares minimizer |
| # Copyright 2015 Google Inc. All rights reserved. |
| # http://ceres-solver.org/ |
| # |
| # Redistribution and use in source and binary forms, with or without |
| # modification, are permitted provided that the following conditions are met: |
| # |
| # * Redistributions of source code must retain the above copyright notice, |
| # this list of conditions and the following disclaimer. |
| # * Redistributions in binary form must reproduce the above copyright notice, |
| # this list of conditions and the following disclaimer in the documentation |
| # and/or other materials provided with the distribution. |
| # * Neither the name of Google Inc. nor the names of its contributors may be |
| # used to endorse or promote products derived from this software without |
| # specific prior written permission. |
| # |
| # THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" |
| # AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE |
| # IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE |
| # ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE |
| # LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR |
| # CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF |
| # SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS |
| # INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN |
| # CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) |
| # ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE |
| # POSSIBILITY OF SUCH DAMAGE. |
| # |
| # Author: alexs.mac@gmail.com (Alex Stewart) |
| # |
| |
| # FindGlog.cmake - Find Google glog logging library. |
| # |
| # This module defines the following variables: |
| # |
| # GLOG_FOUND: TRUE iff glog is found. |
| # GLOG_INCLUDE_DIRS: Include directories for glog. |
| # GLOG_LIBRARIES: Libraries required to link glog. |
| # FOUND_INSTALLED_GLOG_CMAKE_CONFIGURATION: True iff the version of glog found |
| # was built & installed / exported |
| # as a CMake package. |
| # |
| # The following variables control the behaviour of this module: |
| # |
| # GLOG_PREFER_EXPORTED_GLOG_CMAKE_CONFIGURATION: TRUE/FALSE, iff TRUE then |
| # then prefer using an exported CMake configuration |
| # generated by glog > 0.3.4 over searching for the |
| # glog components manually. Otherwise (FALSE) |
| # ignore any exported glog CMake configurations and |
| # always perform a manual search for the components. |
| # Default: TRUE iff user does not define this variable |
| # before we are called, and does NOT specify either |
| # GLOG_INCLUDE_DIR_HINTS or GLOG_LIBRARY_DIR_HINTS |
| # otherwise FALSE. |
| # GLOG_INCLUDE_DIR_HINTS: List of additional directories in which to |
| # search for glog includes, e.g: /timbuktu/include. |
| # GLOG_LIBRARY_DIR_HINTS: List of additional directories in which to |
| # search for glog libraries, e.g: /timbuktu/lib. |
| # |
| # The following variables are also defined by this module, but in line with |
| # CMake recommended FindPackage() module style should NOT be referenced directly |
| # by callers (use the plural variables detailed above instead). These variables |
| # do however affect the behaviour of the module via FIND_[PATH/LIBRARY]() which |
| # are NOT re-called (i.e. search for library is not repeated) if these variables |
| # are set with valid values _in the CMake cache_. This means that if these |
| # variables are set directly in the cache, either by the user in the CMake GUI, |
| # or by the user passing -DVAR=VALUE directives to CMake when called (which |
| # explicitly defines a cache variable), then they will be used verbatim, |
| # bypassing the HINTS variables and other hard-coded search locations. |
| # |
| # GLOG_INCLUDE_DIR: Include directory for glog, not including the |
| # include directory of any dependencies. |
| # GLOG_LIBRARY: glog library, not including the libraries of any |
| # dependencies. |
| |
| # Reset CALLERS_CMAKE_FIND_LIBRARY_PREFIXES to its value when |
| # FindGlog was invoked. |
| macro(GLOG_RESET_FIND_LIBRARY_PREFIX) |
| if (MSVC AND CALLERS_CMAKE_FIND_LIBRARY_PREFIXES) |
| set(CMAKE_FIND_LIBRARY_PREFIXES "${CALLERS_CMAKE_FIND_LIBRARY_PREFIXES}") |
| endif() |
| endmacro(GLOG_RESET_FIND_LIBRARY_PREFIX) |
| |
| # Called if we failed to find glog or any of it's required dependencies, |
| # unsets all public (designed to be used externally) variables and reports |
| # error message at priority depending upon [REQUIRED/QUIET/<NONE>] argument. |
| macro(GLOG_REPORT_NOT_FOUND REASON_MSG) |
| unset(GLOG_FOUND) |
| unset(GLOG_INCLUDE_DIRS) |
| unset(GLOG_LIBRARIES) |
| # Make results of search visible in the CMake GUI if glog has not |
| # been found so that user does not have to toggle to advanced view. |
| mark_as_advanced(CLEAR GLOG_INCLUDE_DIR |
| GLOG_LIBRARY) |
| |
| glog_reset_find_library_prefix() |
| |
| # Note <package>_FIND_[REQUIRED/QUIETLY] variables defined by FindPackage() |
| # use the camelcase library name, not uppercase. |
| if (Glog_FIND_QUIETLY) |
| message(STATUS "Failed to find glog - " ${REASON_MSG} ${ARGN}) |
| elseif (Glog_FIND_REQUIRED) |
| message(FATAL_ERROR "Failed to find glog - " ${REASON_MSG} ${ARGN}) |
| else() |
| # Neither QUIETLY nor REQUIRED, use no priority which emits a message |
| # but continues configuration and allows generation. |
| message("-- Failed to find glog - " ${REASON_MSG} ${ARGN}) |
| endif () |
| return() |
| endmacro(GLOG_REPORT_NOT_FOUND) |
| |
| # glog_message([mode] "message text") |
| # |
| # Wraps the standard cmake 'message' command, but suppresses output |
| # if the QUIET flag was passed to the find_package(Glog ...) call. |
| function(GLOG_MESSAGE) |
| if (NOT Glog_FIND_QUIETLY) |
| message(${ARGN}) |
| endif() |
| endfunction() |
| |
| # Protect against any alternative find_package scripts for this library having |
| # been called previously (in a client project) which set GLOG_FOUND, but not |
| # the other variables we require / set here which could cause the search logic |
| # here to fail. |
| unset(GLOG_FOUND) |
| |
| # ----------------------------------------------------------------- |
| # By default, if the user has expressed no preference for using an exported |
| # glog CMake configuration over performing a search for the installed |
| # components, and has not specified any hints for the search locations, then |
| # prefer a glog exported configuration if available. |
| if (NOT DEFINED GLOG_PREFER_EXPORTED_GLOG_CMAKE_CONFIGURATION |
| AND NOT GLOG_INCLUDE_DIR_HINTS |
| AND NOT GLOG_LIBRARY_DIR_HINTS) |
| glog_message(STATUS "No preference for use of exported glog CMake " |
| "configuration set, and no hints for include/library directories provided. " |
| "Defaulting to preferring an installed/exported glog CMake configuration " |
| "if available.") |
| set(GLOG_PREFER_EXPORTED_GLOG_CMAKE_CONFIGURATION TRUE) |
| endif() |
| |
| # On macOS, add the Homebrew prefix (with appropriate suffixes) to the |
| # respective HINTS directories (after any user-specified locations). This |
| # handles Homebrew installations into non-standard locations (not /usr/local). |
| # We do not use CMAKE_PREFIX_PATH for this as given the search ordering of |
| # find_xxx(), doing so would override any user-specified HINTS locations with |
| # the Homebrew version if it exists. |
| if (CMAKE_SYSTEM_NAME MATCHES "Darwin") |
| find_program(HOMEBREW_EXECUTABLE brew) |
| mark_as_advanced(FORCE HOMEBREW_EXECUTABLE) |
| if (HOMEBREW_EXECUTABLE) |
| # Detected a Homebrew install, query for its install prefix. |
| execute_process(COMMAND ${HOMEBREW_EXECUTABLE} --prefix |
| OUTPUT_VARIABLE HOMEBREW_INSTALL_PREFIX |
| OUTPUT_STRIP_TRAILING_WHITESPACE) |
| glog_message(STATUS "Detected Homebrew with install prefix: " |
| "${HOMEBREW_INSTALL_PREFIX}, adding to CMake search paths.") |
| list(APPEND GLOG_INCLUDE_DIR_HINTS "${HOMEBREW_INSTALL_PREFIX}/include") |
| list(APPEND GLOG_LIBRARY_DIR_HINTS "${HOMEBREW_INSTALL_PREFIX}/lib") |
| endif() |
| endif() |
| |
| if (GLOG_PREFER_EXPORTED_GLOG_CMAKE_CONFIGURATION) |
| # Try to find an exported CMake configuration for glog, as generated by |
| # glog versions > 0.3.4 |
| # |
| # We search twice, s/t we can invert the ordering of precedence used by |
| # find_package() for exported package build directories, and installed |
| # packages (found via CMAKE_SYSTEM_PREFIX_PATH), listed as items 6) and 7) |
| # respectively in [1]. |
| # |
| # By default, exported build directories are (in theory) detected first, and |
| # this is usually the case on Windows. However, on OS X & Linux, the install |
| # path (/usr/local) is typically present in the PATH environment variable |
| # which is checked in item 4) in [1] (i.e. before both of the above, unless |
| # NO_SYSTEM_ENVIRONMENT_PATH is passed). As such on those OSs installed |
| # packages are usually detected in preference to exported package build |
| # directories. |
| # |
| # To ensure a more consistent response across all OSs, and as users usually |
| # want to prefer an installed version of a package over a locally built one |
| # where both exist (esp. as the exported build directory might be removed |
| # after installation), we first search with NO_CMAKE_PACKAGE_REGISTRY which |
| # means any build directories exported by the user are ignored, and thus |
| # installed directories are preferred. If this fails to find the package |
| # we then research again, but without NO_CMAKE_PACKAGE_REGISTRY, so any |
| # exported build directories will now be detected. |
| # |
| # To prevent confusion on Windows, we also pass NO_CMAKE_BUILDS_PATH (which |
| # is item 5) in [1]), to not preferentially use projects that were built |
| # recently with the CMake GUI to ensure that we always prefer an installed |
| # version if available. |
| # |
| # NOTE: We use the NAMES option as glog erroneously uses 'google-glog' as its |
| # project name when built with CMake, but exports itself as just 'glog'. |
| # On Linux/OS X this does not break detection as the project name is |
| # not used as part of the install path for the CMake package files, |
| # e.g. /usr/local/lib/cmake/glog, where the <glog> suffix is hardcoded |
| # in glog's CMakeLists. However, on Windows the project name *is* |
| # part of the install prefix: C:/Program Files/google-glog/[include,lib]. |
| # However, by default CMake checks: |
| # C:/Program Files/<FIND_PACKAGE_ARGUMENT_NAME='glog'> which does not |
| # exist and thus detection fails. Thus we use the NAMES to force the |
| # search to use both google-glog & glog. |
| # |
| # [1] http://www.cmake.org/cmake/help/v2.8.11/cmake.html#command:find_package |
| find_package(glog QUIET |
| NAMES google-glog glog |
| HINTS ${glog_DIR} ${HOMEBREW_INSTALL_PREFIX} |
| NO_MODULE |
| NO_CMAKE_PACKAGE_REGISTRY |
| NO_CMAKE_BUILDS_PATH) |
| if (glog_FOUND) |
| glog_message(STATUS "Found installed version of glog: ${glog_DIR}") |
| else() |
| # Failed to find an installed version of glog, repeat search allowing |
| # exported build directories. |
| glog_message(STATUS "Failed to find installed glog CMake configuration, " |
| "searching for glog build directories exported with CMake.") |
| # Again pass NO_CMAKE_BUILDS_PATH, as we know that glog is exported and |
| # do not want to treat projects built with the CMake GUI preferentially. |
| find_package(glog QUIET |
| NAMES google-glog glog |
| NO_MODULE |
| NO_CMAKE_BUILDS_PATH) |
| if (glog_FOUND) |
| glog_message(STATUS "Found exported glog build directory: ${glog_DIR}") |
| endif(glog_FOUND) |
| endif(glog_FOUND) |
| |
| set(FOUND_INSTALLED_GLOG_CMAKE_CONFIGURATION ${glog_FOUND}) |
| |
| if (FOUND_INSTALLED_GLOG_CMAKE_CONFIGURATION) |
| glog_message(STATUS "Detected glog version: ${glog_VERSION}") |
| set(GLOG_FOUND ${glog_FOUND}) |
| # glog wraps the include directories into the exported glog::glog target. |
| set(GLOG_INCLUDE_DIR "") |
| set(GLOG_LIBRARY glog::glog) |
| else (FOUND_INSTALLED_GLOG_CMAKE_CONFIGURATION) |
| glog_message(STATUS "Failed to find an installed/exported CMake " |
| "configuration for glog, will perform search for installed glog " |
| "components.") |
| endif (FOUND_INSTALLED_GLOG_CMAKE_CONFIGURATION) |
| endif(GLOG_PREFER_EXPORTED_GLOG_CMAKE_CONFIGURATION) |
| |
| if (NOT GLOG_FOUND) |
| # Either failed to find an exported glog CMake configuration, or user |
| # told us not to use one. Perform a manual search for all glog components. |
| |
| # Handle possible presence of lib prefix for libraries on MSVC, see |
| # also GLOG_RESET_FIND_LIBRARY_PREFIX(). |
| if (MSVC) |
| # Preserve the caller's original values for CMAKE_FIND_LIBRARY_PREFIXES |
| # s/t we can set it back before returning. |
| set(CALLERS_CMAKE_FIND_LIBRARY_PREFIXES "${CMAKE_FIND_LIBRARY_PREFIXES}") |
| # The empty string in this list is important, it represents the case when |
| # the libraries have no prefix (shared libraries / DLLs). |
| set(CMAKE_FIND_LIBRARY_PREFIXES "lib" "" "${CMAKE_FIND_LIBRARY_PREFIXES}") |
| endif (MSVC) |
| |
| # Search user-installed locations first, so that we prefer user installs |
| # to system installs where both exist. |
| list(APPEND GLOG_CHECK_INCLUDE_DIRS |
| /usr/local/include |
| /usr/local/homebrew/include # Mac OS X |
| /opt/local/var/macports/software # Mac OS X. |
| /opt/local/include |
| /usr/include) |
| # Windows (for C:/Program Files prefix). |
| list(APPEND GLOG_CHECK_PATH_SUFFIXES |
| glog/include |
| glog/Include |
| Glog/include |
| Glog/Include |
| google-glog/include # CMake installs with project name prefix. |
| google-glog/Include) |
| |
| list(APPEND GLOG_CHECK_LIBRARY_DIRS |
| /usr/local/lib |
| /usr/local/homebrew/lib # Mac OS X. |
| /opt/local/lib |
| /usr/lib) |
| # Windows (for C:/Program Files prefix). |
| list(APPEND GLOG_CHECK_LIBRARY_SUFFIXES |
| glog/lib |
| glog/Lib |
| Glog/lib |
| Glog/Lib |
| google-glog/lib # CMake installs with project name prefix. |
| google-glog/Lib) |
| |
| # Search supplied hint directories first if supplied. |
| find_path(GLOG_INCLUDE_DIR |
| NAMES glog/logging.h |
| HINTS ${GLOG_INCLUDE_DIR_HINTS} |
| PATHS ${GLOG_CHECK_INCLUDE_DIRS} |
| PATH_SUFFIXES ${GLOG_CHECK_PATH_SUFFIXES}) |
| if (NOT GLOG_INCLUDE_DIR OR |
| NOT EXISTS ${GLOG_INCLUDE_DIR}) |
| glog_report_not_found( |
| "Could not find glog include directory, set GLOG_INCLUDE_DIR " |
| "to directory containing glog/logging.h") |
| endif (NOT GLOG_INCLUDE_DIR OR |
| NOT EXISTS ${GLOG_INCLUDE_DIR}) |
| |
| find_library(GLOG_LIBRARY NAMES glog |
| HINTS ${GLOG_LIBRARY_DIR_HINTS} |
| PATHS ${GLOG_CHECK_LIBRARY_DIRS} |
| PATH_SUFFIXES ${GLOG_CHECK_LIBRARY_SUFFIXES}) |
| if (NOT GLOG_LIBRARY OR |
| NOT EXISTS ${GLOG_LIBRARY}) |
| glog_report_not_found( |
| "Could not find glog library, set GLOG_LIBRARY " |
| "to full path to libglog.") |
| endif (NOT GLOG_LIBRARY OR |
| NOT EXISTS ${GLOG_LIBRARY}) |
| |
| # Mark internally as found, then verify. GLOG_REPORT_NOT_FOUND() unsets |
| # if called. |
| set(GLOG_FOUND TRUE) |
| |
| # Glog does not seem to provide any record of the version in its |
| # source tree, thus cannot extract version. |
| |
| # Catch case when caller has set GLOG_INCLUDE_DIR in the cache / GUI and |
| # thus FIND_[PATH/LIBRARY] are not called, but specified locations are |
| # invalid, otherwise we would report the library as found. |
| if (GLOG_INCLUDE_DIR AND |
| NOT EXISTS ${GLOG_INCLUDE_DIR}/glog/logging.h) |
| glog_report_not_found( |
| "Caller defined GLOG_INCLUDE_DIR:" |
| " ${GLOG_INCLUDE_DIR} does not contain glog/logging.h header.") |
| endif (GLOG_INCLUDE_DIR AND |
| NOT EXISTS ${GLOG_INCLUDE_DIR}/glog/logging.h) |
| # TODO: This regex for glog library is pretty primitive, we use lowercase |
| # for comparison to handle Windows using CamelCase library names, could |
| # this check be better? |
| string(TOLOWER "${GLOG_LIBRARY}" LOWERCASE_GLOG_LIBRARY) |
| if (GLOG_LIBRARY AND |
| NOT "${LOWERCASE_GLOG_LIBRARY}" MATCHES ".*glog[^/]*") |
| glog_report_not_found( |
| "Caller defined GLOG_LIBRARY: " |
| "${GLOG_LIBRARY} does not match glog.") |
| endif (GLOG_LIBRARY AND |
| NOT "${LOWERCASE_GLOG_LIBRARY}" MATCHES ".*glog[^/]*") |
| |
| glog_reset_find_library_prefix() |
| |
| endif(NOT GLOG_FOUND) |
| |
| # Set standard CMake FindPackage variables if found. |
| if (GLOG_FOUND) |
| set(GLOG_INCLUDE_DIRS ${GLOG_INCLUDE_DIR}) |
| set(GLOG_LIBRARIES ${GLOG_LIBRARY}) |
| endif (GLOG_FOUND) |
| |
| # If we are using an exported CMake glog target, the include directories are |
| # wrapped into the target itself, and do not have to be (and are not) |
| # separately specified. In which case, we should not add GLOG_INCLUDE_DIRS |
| # to the list of required variables in order that glog be reported as found. |
| if (FOUND_INSTALLED_GLOG_CMAKE_CONFIGURATION) |
| set(GLOG_REQUIRED_VARIABLES GLOG_LIBRARIES) |
| else() |
| set(GLOG_REQUIRED_VARIABLES GLOG_INCLUDE_DIRS GLOG_LIBRARIES) |
| endif() |
| |
| # Handle REQUIRED / QUIET optional arguments. |
| include(FindPackageHandleStandardArgs) |
| find_package_handle_standard_args(Glog DEFAULT_MSG |
| ${GLOG_REQUIRED_VARIABLES}) |
| |
| # Only mark internal variables as advanced if we found glog, otherwise |
| # leave them visible in the standard GUI for the user to set manually. |
| if (GLOG_FOUND) |
| mark_as_advanced(FORCE GLOG_INCLUDE_DIR |
| GLOG_LIBRARY |
| glog_DIR) # Autogenerated by find_package(glog) |
| endif (GLOG_FOUND) |