| # Ceres Solver - A fast non-linear least squares minimizer |
| # Copyright 2015 Google Inc. All rights reserved. |
| # http://ceres-solver.org/ |
| # |
| # Redistribution and use in source and binary forms, with or without |
| # modification, are permitted provided that the following conditions are met: |
| # |
| # * Redistributions of source code must retain the above copyright notice, |
| # this list of conditions and the following disclaimer. |
| # * Redistributions in binary form must reproduce the above copyright notice, |
| # this list of conditions and the following disclaimer in the documentation |
| # and/or other materials provided with the distribution. |
| # * Neither the name of Google Inc. nor the names of its contributors may be |
| # used to endorse or promote products derived from this software without |
| # specific prior written permission. |
| # |
| # THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" |
| # AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE |
| # IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE |
| # ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE |
| # LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR |
| # CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF |
| # SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS |
| # INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN |
| # CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) |
| # ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE |
| # POSSIBILITY OF SUCH DAMAGE. |
| # |
| # Authors: pablo.speciale@gmail.com (Pablo Speciale) |
| # alexs.mac@gmail.com (Alex Stewart) |
| # |
| |
| # Config file for Ceres Solver - Find Ceres & dependencies. |
| # |
| # This file is used by CMake when find_package(Ceres) is invoked and either |
| # the directory containing this file either is present in CMAKE_MODULE_PATH |
| # (if Ceres was installed), or exists in the local CMake package registry if |
| # the Ceres build directory was exported. |
| # |
| # This module defines the following variables: |
| # |
| # Ceres_FOUND / CERES_FOUND: True if Ceres has been successfully |
| # found. Both variables are set as although |
| # FindPackage() only references Ceres_FOUND |
| # in Config mode, given the conventions for |
| # <package>_FOUND when FindPackage() is |
| # called in Module mode, users could |
| # reasonably expect to use CERES_FOUND |
| # instead. |
| # |
| # CERES_VERSION: Version of Ceres found. |
| # |
| # CERES_INCLUDE_DIRS: Include directories for Ceres and the |
| # dependencies which appear in the Ceres public |
| # API and are thus required to use Ceres. |
| # |
| # CERES_LIBRARIES: Libraries for Ceres and all |
| # dependencies against which Ceres was |
| # compiled. This will not include any optional |
| # dependencies that were disabled when Ceres was |
| # compiled. |
| # |
| # The following variables are also defined for legacy compatibility |
| # only. Any new code should not use them as they do not conform to |
| # the standard CMake FindPackage naming conventions. |
| # |
| # CERES_INCLUDES = ${CERES_INCLUDE_DIRS}. |
| |
| # Called if we failed to find Ceres or any of its required dependencies, |
| # unsets all public (designed to be used externally) variables and reports |
| # error message at priority depending upon [REQUIRED/QUIET/<NONE>] argument. |
| macro(CERES_REPORT_NOT_FOUND REASON_MSG) |
| # FindPackage() only references Ceres_FOUND, and requires it to be |
| # explicitly set FALSE to denote not found (not merely undefined). |
| set(Ceres_FOUND FALSE) |
| set(CERES_FOUND FALSE) |
| unset(CERES_INCLUDE_DIRS) |
| unset(CERES_LIBRARIES) |
| |
| # Reset the CMake module path to its state when this script was called. |
| set(CMAKE_MODULE_PATH ${CALLERS_CMAKE_MODULE_PATH}) |
| |
| # Note <package>_FIND_[REQUIRED/QUIETLY] variables defined by |
| # FindPackage() use the camelcase library name, not uppercase. |
| if (Ceres_FIND_QUIETLY) |
| message(STATUS "Failed to find Ceres - " ${REASON_MSG} ${ARGN}) |
| else (Ceres_FIND_REQUIRED) |
| message(FATAL_ERROR "Failed to find Ceres - " ${REASON_MSG} ${ARGN}) |
| else() |
| # Neither QUIETLY nor REQUIRED, use SEND_ERROR which emits an error |
| # that prevents generation, but continues configuration. |
| message(SEND_ERROR "Failed to find Ceres - " ${REASON_MSG} ${ARGN}) |
| endif () |
| return() |
| endmacro(CERES_REPORT_NOT_FOUND) |
| |
| # If Ceres was not installed, then by definition it was exported |
| # from a build directory. |
| set(CERES_WAS_INSTALLED @SETUP_CERES_CONFIG_FOR_INSTALLATION@) |
| |
| # Record the state of the CMake module path when this script was |
| # called so that we can ensure that we leave it in the same state on |
| # exit as it was on entry, but modify it locally. |
| set(CALLERS_CMAKE_MODULE_PATH ${CMAKE_MODULE_PATH}) |
| |
| # Get the (current, i.e. installed) directory containing this file. |
| get_filename_component(CERES_CURRENT_CONFIG_DIR |
| "${CMAKE_CURRENT_LIST_FILE}" PATH) |
| |
| if (CERES_WAS_INSTALLED) |
| # Reset CMake module path to the installation directory of this |
| # script, thus we will use the FindPackage() scripts shipped with |
| # Ceres to find Ceres' dependencies, even if the user has equivalently |
| # named FindPackage() scripts in their project. |
| set(CMAKE_MODULE_PATH ${CERES_CURRENT_CONFIG_DIR}) |
| |
| # Build the absolute root install directory as a relative path |
| # (determined when Ceres was configured & built) from the current |
| # install directory for this this file. This allows for the install |
| # tree to be relocated, after Ceres was built, outside of CMake. |
| get_filename_component(CURRENT_ROOT_INSTALL_DIR |
| ${CERES_CURRENT_CONFIG_DIR}/@INSTALL_ROOT_REL_CONFIG_INSTALL_DIR@ |
| ABSOLUTE) |
| if (NOT EXISTS ${CURRENT_ROOT_INSTALL_DIR}) |
| ceres_report_not_found( |
| "Ceres install root: ${CURRENT_ROOT_INSTALL_DIR}, " |
| "determined from relative path from CeresConfig.cmake install location: " |
| "${CERES_CURRENT_CONFIG_DIR}, does not exist. Either the install " |
| "directory was deleted, or the install tree was only partially relocated " |
| "outside of CMake after Ceres was built.") |
| endif (NOT EXISTS ${CURRENT_ROOT_INSTALL_DIR}) |
| |
| # Set the include directories for Ceres (itself). |
| set(CERES_INCLUDE_DIR "${CURRENT_ROOT_INSTALL_DIR}/include") |
| if (NOT EXISTS ${CERES_INCLUDE_DIR}/ceres/ceres.h) |
| ceres_report_not_found( |
| "Ceres install root: ${CURRENT_ROOT_INSTALL_DIR}, " |
| "determined from relative path from CeresConfig.cmake install location: " |
| "${CERES_CURRENT_CONFIG_DIR}, does not contain Ceres headers. " |
| "Either the install directory was deleted, or the install tree was only " |
| "partially relocated outside of CMake after Ceres was built.") |
| endif (NOT EXISTS ${CERES_INCLUDE_DIR}/ceres/ceres.h) |
| list(APPEND CERES_INCLUDE_DIRS ${CERES_INCLUDE_DIR}) |
| |
| else(CERES_WAS_INSTALLED) |
| # Ceres was exported from the build tree. |
| set(CERES_EXPORTED_BUILD_DIR ${CERES_CURRENT_CONFIG_DIR}) |
| get_filename_component(CERES_EXPORTED_SOURCE_DIR |
| ${CERES_EXPORTED_BUILD_DIR}/@INSTALL_ROOT_REL_CONFIG_INSTALL_DIR@ |
| ABSOLUTE) |
| if (NOT EXISTS ${CERES_EXPORTED_SOURCE_DIR}) |
| ceres_report_not_found( |
| "Ceres exported source directory: ${CERES_EXPORTED_SOURCE_DIR}, " |
| "determined from relative path from CeresConfig.cmake exported build " |
| "directory: ${CERES_EXPORTED_BUILD_DIR} does not exist.") |
| endif() |
| |
| # Reset CMake module path to the cmake directory in the Ceres source |
| # tree which was exported, thus we will use the FindPackage() scripts shipped |
| # with Ceres to find Ceres' dependencies, even if the user has equivalently |
| # named FindPackage() scripts in their project. |
| set(CMAKE_MODULE_PATH ${CERES_EXPORTED_SOURCE_DIR}/cmake) |
| |
| # Set the include directories for Ceres (itself). |
| set(CERES_INCLUDE_DIR "${CERES_EXPORTED_SOURCE_DIR}/include") |
| if (NOT EXISTS ${CERES_INCLUDE_DIR}/ceres/ceres.h) |
| ceres_report_not_found( |
| "Ceres exported source directory: ${CERES_EXPORTED_SOURCE_DIR}, " |
| "determined from relative path from CeresConfig.cmake exported build " |
| "directory: ${CERES_EXPORTED_BUILD_DIR}, does not contain Ceres headers.") |
| endif (NOT EXISTS ${CERES_INCLUDE_DIR}/ceres/ceres.h) |
| list(APPEND CERES_INCLUDE_DIRS ${CERES_INCLUDE_DIR}) |
| |
| # Append the path to the configured config.h in the exported build directory |
| # to the Ceres include directories. |
| set(CERES_CONFIG_FILE |
| ${CERES_EXPORTED_BUILD_DIR}/config/ceres/internal/config.h) |
| if (NOT EXISTS ${CERES_CONFIG_FILE}) |
| ceres_report_not_found( |
| "Ceres exported build directory: ${CERES_EXPORTED_BUILD_DIR}, " |
| "does not contain required configured Ceres config.h, it is not here: " |
| "${CERES_CONFIG_FILE}.") |
| endif (NOT EXISTS ${CERES_CONFIG_FILE}) |
| list(APPEND CERES_INCLUDE_DIRS ${CERES_EXPORTED_BUILD_DIR}/config) |
| endif(CERES_WAS_INSTALLED) |
| |
| # Set the version. |
| set(CERES_VERSION @CERES_VERSION@ ) |
| |
| # Eigen. |
| # Flag set during configuration and build of Ceres. |
| set(CERES_EIGEN_VERSION @EIGEN_VERSION@) |
| # Append the locations of Eigen when Ceres was built to the search path hints. |
| list(APPEND EIGEN_INCLUDE_DIR_HINTS @EIGEN_INCLUDE_DIR@) |
| # Search quietly to control the timing of the error message if not found. The |
| # search should be for an exact match, but for usability reasons do a soft |
| # match and reject with an explanation below. |
| find_package(Eigen ${CERES_EIGEN_VERSION} QUIET) |
| if (EIGEN_FOUND) |
| if (NOT EIGEN_VERSION VERSION_EQUAL CERES_EIGEN_VERSION) |
| # CMake's VERSION check in FIND_PACKAGE() will accept any version >= the |
| # specified version. However, only version = is supported. Improve |
| # usability by explaining why we don't accept non-exact version matching. |
| ceres_report_not_found("Found Eigen dependency, but the version of Eigen " |
| "found (${EIGEN_VERSION}) does not exactly match the version of Eigen " |
| "Ceres was compiled with (${CERES_EIGEN_VERSION}). This can cause subtle " |
| "bugs by triggering violations of the One Definition Rule. See the " |
| "Wikipedia article http://en.wikipedia.org/wiki/One_Definition_Rule " |
| "for more details") |
| endif () |
| message(STATUS "Found required Ceres dependency: " |
| "Eigen version ${CERES_EIGEN_VERSION} in ${EIGEN_INCLUDE_DIRS}") |
| else (EIGEN_FOUND) |
| ceres_report_not_found("Missing required Ceres " |
| "dependency: Eigen version ${CERES_EIGEN_VERSION}, please set " |
| "EIGEN_INCLUDE_DIR.") |
| endif (EIGEN_FOUND) |
| list(APPEND CERES_INCLUDE_DIRS ${EIGEN_INCLUDE_DIRS}) |
| |
| # Glog. |
| # Flag set during configuration and build of Ceres. |
| set(CERES_USES_MINIGLOG @MINIGLOG@) |
| if (CERES_USES_MINIGLOG) |
| set(MINIGLOG_INCLUDE_DIR ${CERES_INCLUDE_DIR}/ceres/internal/miniglog) |
| if (NOT EXISTS ${MINIGLOG_INCLUDE_DIR}) |
| ceres_report_not_found( |
| "Ceres include directory: " |
| "${CERES_INCLUDE_DIR} does not include miniglog, but Ceres was " |
| "compiled with MINIGLOG enabled (in place of Glog).") |
| endif (NOT EXISTS ${MINIGLOG_INCLUDE_DIR}) |
| list(APPEND CERES_INCLUDE_DIRS ${MINIGLOG_INCLUDE_DIR}) |
| # Output message at standard log level (not the lower STATUS) so that |
| # the message is output in GUI during configuration to warn user. |
| message("-- Found Ceres compiled with miniglog substitute " |
| "for glog, beware this will likely cause problems if glog is later linked.") |
| else (CERES_USES_MINIGLOG) |
| # Append the locations of glog when Ceres was built to the search path hints. |
| list(APPEND GLOG_INCLUDE_DIR_HINTS @GLOG_INCLUDE_DIR@) |
| get_filename_component(CERES_BUILD_GLOG_LIBRARY_DIR @GLOG_LIBRARY@ PATH) |
| list(APPEND GLOG_LIBRARY_DIR_HINTS ${CERES_BUILD_GLOG_LIBRARY_DIR}) |
| |
| # Search quietly s/t we control the timing of the error message if not found. |
| find_package(Glog QUIET) |
| if (GLOG_FOUND) |
| message(STATUS "Found required Ceres dependency: " |
| "Glog in ${GLOG_INCLUDE_DIRS}") |
| else (GLOG_FOUND) |
| ceres_report_not_found("Missing required Ceres " |
| "dependency: Glog, please set GLOG_INCLUDE_DIR.") |
| endif (GLOG_FOUND) |
| list(APPEND CERES_INCLUDE_DIRS ${GLOG_INCLUDE_DIRS}) |
| endif (CERES_USES_MINIGLOG) |
| |
| # Import exported Ceres targets, if they have not already been imported. |
| if (NOT TARGET ceres AND NOT Ceres_BINARY_DIR) |
| include(${CERES_CURRENT_CONFIG_DIR}/CeresTargets.cmake) |
| endif (NOT TARGET ceres AND NOT Ceres_BINARY_DIR) |
| # Set the expected XX_LIBRARIES variable for FindPackage(). |
| set(CERES_LIBRARIES ceres) |
| |
| # Make user aware of any compile flags that will be added to their targets |
| # which use Ceres (i.e. flags exported in the Ceres target). Only CMake |
| # versions >= 2.8.12 support target_compile_options(). |
| if (TARGET ${CERES_LIBRARIES} AND |
| NOT CMAKE_VERSION VERSION_LESS "2.8.12") |
| get_target_property(CERES_INTERFACE_COMPILE_OPTIONS |
| ${CERES_LIBRARIES} INTERFACE_COMPILE_OPTIONS) |
| |
| if (CERES_WAS_INSTALLED) |
| set(CERES_LOCATION "${CURRENT_ROOT_INSTALL_DIR}") |
| else() |
| set(CERES_LOCATION "${CERES_EXPORTED_BUILD_DIR}") |
| endif() |
| |
| # Check for -std=c++11 flags. |
| if (CERES_INTERFACE_COMPILE_OPTIONS MATCHES ".*std=c\\+\\+11.*") |
| message(STATUS "Ceres version ${CERES_VERSION} detected here: " |
| "${CERES_LOCATION} was built with C++11. Ceres target will add " |
| "C++11 flags to compile options for targets using it.") |
| endif() |
| endif() |
| |
| # Set legacy include directories variable for backwards compatibility. |
| set(CERES_INCLUDES ${CERES_INCLUDE_DIRS}) |
| |
| # Reset CMake module path to its state when this script was called. |
| set(CMAKE_MODULE_PATH ${CALLERS_CMAKE_MODULE_PATH}) |
| |
| # As we use CERES_REPORT_NOT_FOUND() to abort, if we reach this point we have |
| # found Ceres and all required dependencies. |
| if (CERES_WAS_INSTALLED) |
| message(STATUS "Found Ceres version: ${CERES_VERSION} " |
| "installed in: ${CURRENT_ROOT_INSTALL_DIR}") |
| else (CERES_WAS_INSTALLED) |
| message(STATUS "Found Ceres version: ${CERES_VERSION} " |
| "exported from build directory: ${CERES_EXPORTED_BUILD_DIR}") |
| endif() |
| |
| # Set CERES_FOUND to be equivalent to Ceres_FOUND, which is set to |
| # TRUE by FindPackage() if this file is found and run, and after which |
| # Ceres_FOUND is not (explicitly, i.e. undefined does not count) set |
| # to FALSE. |
| set(CERES_FOUND TRUE) |