blob: f11e57942feca0a32f02c7b6af055996b8bd505e [file] [log] [blame]
# Ceres Solver - A fast non-linear least squares minimizer
# Copyright 2015 Google Inc. All rights reserved.
# http://ceres-solver.org/
#
# Redistribution and use in source and binary forms, with or without
# modification, are permitted provided that the following conditions are met:
#
# * Redistributions of source code must retain the above copyright notice,
# this list of conditions and the following disclaimer.
# * Redistributions in binary form must reproduce the above copyright notice,
# this list of conditions and the following disclaimer in the documentation
# and/or other materials provided with the distribution.
# * Neither the name of Google Inc. nor the names of its contributors may be
# used to endorse or promote products derived from this software without
# specific prior written permission.
#
# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
# AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
# IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
# ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE
# LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
# CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
# SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
# INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
# CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
# ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
# POSSIBILITY OF SUCH DAMAGE.
#
# Authors: keir@google.com (Keir Mierle)
# alexs.mac@gmail.com (Alex Stewart)
cmake_minimum_required(VERSION 3.5)
cmake_policy(VERSION 3.5)
# Set the C++ version (must be >= C++11) when compiling Ceres.
#
# Reflect a user-specified (via -D) CMAKE_CXX_STANDARD if present, otherwise
# default to C++11.
set(DEFAULT_CXX_STANDARD ${CMAKE_CXX_STANDARD})
if (NOT DEFAULT_CXX_STANDARD)
set(DEFAULT_CXX_STANDARD 11)
endif()
set(CMAKE_CXX_STANDARD ${DEFAULT_CXX_STANDARD} CACHE STRING
"C++ standard (minimum 11)" FORCE)
# Restrict CMAKE_CXX_STANDARD to the valid versions permitted and ensure that
# if one was forced via -D that it is in the valid set.
set(ALLOWED_CXX_STANDARDS 11 14 17)
set_property(CACHE CMAKE_CXX_STANDARD PROPERTY STRINGS ${ALLOWED_CXX_STANDARDS})
list(FIND ALLOWED_CXX_STANDARDS ${CMAKE_CXX_STANDARD} POSITION)
if (POSITION LESS 0)
message(FATAL_ERROR "Invalid CMAKE_CXX_STANDARD: ${CMAKE_CXX_STANDARD}. "
"Must be one of: ${ALLOWED_CXX_STANDARDS}")
endif()
# Specify the standard as a hard requirement, otherwise CMAKE_CXX_STANDARD is
# interpreted as a suggestion that can decay *back* to lower versions.
set(CMAKE_CXX_STANDARD_REQUIRED ON CACHE BOOL "")
mark_as_advanced(CMAKE_CXX_STANDARD_REQUIRED)
# MSVC versions < 2013 did not fully support >= C++11.
if (MSVC AND CMAKE_CXX_COMPILER_VERSION VERSION_LESS 12.0)
message(FATAL_ERROR "Invalid CMAKE_CXX_COMPILER_VERSION: "
"${CMAKE_CXX_COMPILER_VERSION}. Ceres requires at least MSVC 2013 Update 4+")
endif()
# On macOS, add the Homebrew prefix (with appropriate suffixes) to the
# respective HINTS directories (after any user-specified locations). This
# handles Homebrew installations into non-standard locations (not /usr/local).
# We do not use CMAKE_PREFIX_PATH for this as given the search ordering of
# find_xxx(), doing so would override any user-specified HINTS locations with
# the Homebrew version if it exists.
if (CMAKE_SYSTEM_NAME MATCHES "Darwin")
find_program(HOMEBREW_EXECUTABLE brew)
mark_as_advanced(FORCE HOMEBREW_EXECUTABLE)
if (HOMEBREW_EXECUTABLE)
# Detected a Homebrew install, query for its install prefix.
execute_process(COMMAND ${HOMEBREW_EXECUTABLE} --prefix
OUTPUT_VARIABLE HOMEBREW_INSTALL_PREFIX
OUTPUT_STRIP_TRAILING_WHITESPACE)
message(STATUS "Detected Homebrew with install prefix: "
"${HOMEBREW_INSTALL_PREFIX}, adding to CMake search paths.")
list(APPEND HOMEBREW_INCLUDE_DIR_HINTS "${HOMEBREW_INSTALL_PREFIX}/include")
endif()
endif()
project(Ceres C CXX)
# NOTE: The 'generic' CMake variables CMAKE_[SOURCE/BINARY]_DIR should not be
# used. Always use the project-specific variants (generated by CMake):
# <PROJECT_NAME_MATCHING_CASE>_[SOURCE/BINARY]_DIR, e.g.
# Ceres_SOURCE_DIR (note, *not* CERES_SOURCE_DIR) instead, as these will
# always point to the correct directories for the Ceres project, even if
# it is nested inside another source tree, whereas the 'generic'
# CMake variables refer to the *first* project() declaration, i.e. the
# top-level project, not Ceres, if Ceres is nested.
# Make CMake aware of the cmake folder for local FindXXX scripts,
# append rather than set in case the user has passed their own
# additional paths via -D.
list(APPEND CMAKE_MODULE_PATH "${Ceres_SOURCE_DIR}/cmake")
include(AddCompileFlagsIfSupported)
include(UpdateCacheVariable)
# Xcode 11.0-1 with macOS 10.15 (Catalina) broke alignment.
include(DetectBrokenStackCheckMacOSXcodePairing)
detect_broken_stack_check_macos_xcode_pairing()
# Set up the git hook to make Gerrit Change-Id: lines in commit messages.
include(AddGerritCommitHook)
add_gerrit_commit_hook(${Ceres_SOURCE_DIR} ${Ceres_BINARY_DIR})
set(CMAKE_RUNTIME_OUTPUT_DIRECTORY ${Ceres_BINARY_DIR}/bin)
set(CMAKE_LIBRARY_OUTPUT_DIRECTORY ${Ceres_BINARY_DIR}/lib)
set(CMAKE_ARCHIVE_OUTPUT_DIRECTORY ${Ceres_BINARY_DIR}/lib)
# Set postfixes for generated libraries based on buildtype.
set(CMAKE_RELEASE_POSTFIX "")
set(CMAKE_DEBUG_POSTFIX "-debug")
# Read the Ceres version from the source, such that we only ever have a single
# definition of the Ceres version.
include(ReadCeresVersionFromSource)
read_ceres_version_from_source(${Ceres_SOURCE_DIR})
enable_testing()
include(CeresThreadingModels)
include(PrettyPrintCMakeList)
find_available_ceres_threading_models(CERES_THREADING_MODELS_AVAILABLE)
pretty_print_cmake_list(PRETTY_CERES_THREADING_MODELS_AVAILABLE
${CERES_THREADING_MODELS_AVAILABLE})
message("-- Detected available Ceres threading models: "
"${PRETTY_CERES_THREADING_MODELS_AVAILABLE}")
set(CERES_THREADING_MODEL "${CERES_THREADING_MODEL}" CACHE STRING
"Ceres threading back-end" FORCE)
if (NOT CERES_THREADING_MODEL)
list(GET CERES_THREADING_MODELS_AVAILABLE 0 DEFAULT_THREADING_MODEL)
update_cache_variable(CERES_THREADING_MODEL ${DEFAULT_THREADING_MODEL})
endif()
set_property(CACHE CERES_THREADING_MODEL PROPERTY STRINGS
${CERES_THREADING_MODELS_AVAILABLE})
option(MINIGLOG "Use a stripped down version of glog." OFF)
option(GFLAGS "Enable Google Flags." ON)
option(SUITESPARSE "Enable SuiteSparse." ON)
option(CXSPARSE "Enable CXSparse." ON)
if (APPLE)
option(ACCELERATESPARSE
"Enable use of sparse solvers in Apple's Accelerate framework." ON)
endif()
option(LAPACK "Enable use of LAPACK directly within Ceres." ON)
# Template specializations for the Schur complement based solvers. If
# compile time, binary size or compiler performance is an issue, you
# may consider disabling this.
option(SCHUR_SPECIALIZATIONS "Enable fixed-size schur specializations." ON)
option(CUSTOM_BLAS
"Use handcoded BLAS routines (usually faster) instead of Eigen."
ON)
# Enable the use of Eigen as a sparse linear algebra library for
# solving the nonlinear least squares problems.
option(EIGENSPARSE "Enable Eigen as a sparse linear algebra library." ON)
option(EXPORT_BUILD_DIR
"Export build directory using CMake (enables external use without install)." OFF)
option(BUILD_TESTING "Enable tests" ON)
option(BUILD_DOCUMENTATION "Build User's Guide (html)" OFF)
option(BUILD_EXAMPLES "Build examples" ON)
option(BUILD_BENCHMARKS "Build Ceres benchmarking suite" ON)
option(BUILD_SHARED_LIBS "Build Ceres as a shared library." OFF)
option(PROVIDE_UNINSTALL_TARGET "Add a custom target to ease removal of installed targets" ON)
option(CODE_GENERATION "Build the code generation module." OFF)
if(CODE_GENERATION)
message(WARNING "The code generation module is still under development. The functionality and API of the current implementation might change in the future.")
endif(CODE_GENERATION)
set(SANITIZERS "" CACHE STRING "Semicolon-separated list of sanitizers to use (e.g address, memory, thread)")
include(EnableSanitizer)
enable_sanitizer(${SANITIZERS})
if (ANDROID)
option(ANDROID_STRIP_DEBUG_SYMBOLS "Strip debug symbols from Android builds (reduces file sizes)" ON)
endif()
if (MSVC)
option(MSVC_USE_STATIC_CRT
"MS Visual Studio: Use static C-Run Time Library in place of shared." OFF)
if (BUILD_TESTING AND BUILD_SHARED_LIBS)
message(
"-- Disabling tests. The flags BUILD_TESTING and BUILD_SHARED_LIBS"
" are incompatible with MSVC.")
update_cache_variable(BUILD_TESTING OFF)
endif (BUILD_TESTING AND BUILD_SHARED_LIBS)
endif (MSVC)
# Allow user to specify a suffix for the library install directory, the only
# really sensible option (other than "") being "64", such that:
# ${CMAKE_INSTALL_PREFIX}/lib -> ${CMAKE_INSTALL_PREFIX}/lib64.
#
# Heuristic for determining LIB_SUFFIX. FHS recommends that 64-bit systems
# install native libraries to lib64 rather than lib. Most distros seem to
# follow this convention with a couple notable exceptions (Debian-based and
# Arch-based distros) which we try to detect here.
if (CMAKE_SYSTEM_NAME MATCHES "Linux" AND
NOT DEFINED LIB_SUFFIX AND
NOT CMAKE_CROSSCOMPILING AND
CMAKE_SIZEOF_VOID_P EQUAL "8" AND
NOT EXISTS "/etc/debian_version" AND
NOT EXISTS "/etc/arch-release")
message("-- Detected non-Debian/Arch-based 64-bit Linux distribution. "
"Defaulting to library install directory: lib${LIB_SUFFIX}. You can "
"override this by specifying LIB_SUFFIX.")
set(LIB_SUFFIX "64")
endif ()
# Only create the cache variable (for the CMake GUI) after attempting to detect
# the suffix *if not specified by the user* (NOT DEFINED LIB_SUFFIX in if())
# s/t the user could override our autodetected suffix with "" if desired.
set(LIB_SUFFIX "${LIB_SUFFIX}" CACHE STRING
"Suffix of library install directory (to support lib/lib64)." FORCE)
# IOS is defined iff using the iOS.cmake CMake toolchain to build a static
# library for iOS.
if (IOS)
message(STATUS "Building Ceres for iOS platform: ${IOS_PLATFORM}")
# Ceres requires at least iOS 7.0+.
if (IOS_DEPLOYMENT_TARGET VERSION_LESS 7.0)
message(FATAL_ERROR "Unsupported iOS version: ${IOS_DEPLOYMENT_TARGET}, Ceres "
"requires at least iOS version 7.0")
endif()
update_cache_variable(MINIGLOG ON)
message(STATUS "Building for iOS: Forcing use of miniglog instead of glog.")
# Apple claims that the BLAS call dsyrk_ is a private API, and will not allow
# you to submit to the Apple Store if the symbol is present.
update_cache_variable(LAPACK OFF)
message(STATUS "Building for iOS: SuiteSparse, CXSparse, LAPACK, gflags, "
"and OpenMP are not available.")
update_cache_variable(BUILD_EXAMPLES OFF)
message(STATUS "Building for iOS: Will not build examples.")
endif (IOS)
unset(CERES_COMPILE_OPTIONS)
message("-- Building with C++${CMAKE_CXX_STANDARD}")
# Eigen.
# Eigen delivers Eigen3Config.cmake since v3.3.3
find_package(Eigen3 3.3 CONFIG REQUIRED
HINTS ${HOMEBREW_INCLUDE_DIR_HINTS})
if (EIGEN3_FOUND)
message("-- Found Eigen version ${EIGEN3_VERSION_STRING}: ${EIGEN3_INCLUDE_DIRS}")
if (CMAKE_SYSTEM_PROCESSOR MATCHES "^(aarch64.*|AARCH64.*)" AND
EIGEN3_VERSION_STRING VERSION_LESS 3.3.4)
# As per issue #289: https://github.com/ceres-solver/ceres-solver/issues/289
# the bundle_adjustment_test will fail for Eigen < 3.3.4 on aarch64.
message(FATAL_ERROR "-- Ceres requires Eigen version >= 3.3.4 on aarch64. "
"Detected version of Eigen is: ${EIGEN3_VERSION_STRING}.")
endif()
if (EIGENSPARSE)
message("-- Enabling use of Eigen as a sparse linear algebra library.")
list(APPEND CERES_COMPILE_OPTIONS CERES_USE_EIGEN_SPARSE)
else (EIGENSPARSE)
message("-- Disabling use of Eigen as a sparse linear algebra library.")
message(" This does not affect the covariance estimation algorithm ")
message(" which can still use the EIGEN_SPARSE_QR algorithm.")
add_definitions(-DEIGEN_MPL2_ONLY)
endif (EIGENSPARSE)
endif (EIGEN3_FOUND)
if (LAPACK)
find_package(LAPACK QUIET)
if (LAPACK_FOUND)
message("-- Found LAPACK library: ${LAPACK_LIBRARIES}")
else (LAPACK_FOUND)
message("-- Did not find LAPACK library, disabling LAPACK support.")
update_cache_variable(LAPACK OFF)
list(APPEND CERES_COMPILE_OPTIONS CERES_NO_LAPACK)
endif (LAPACK_FOUND)
else (LAPACK)
message("-- Building without LAPACK.")
list(APPEND CERES_COMPILE_OPTIONS CERES_NO_LAPACK)
endif (LAPACK)
if (SUITESPARSE)
# By default, if SuiteSparse and all dependencies are found, Ceres is
# built with SuiteSparse support.
# Check for SuiteSparse and dependencies.
find_package(SuiteSparse)
if (SUITESPARSE_FOUND)
# On Ubuntu the system install of SuiteSparse (v3.4.0) up to at least
# Ubuntu 13.10 cannot be used to link shared libraries.
if (BUILD_SHARED_LIBS AND
SUITESPARSE_IS_BROKEN_SHARED_LINKING_UBUNTU_SYSTEM_VERSION)
message(FATAL_ERROR "You are attempting to build Ceres as a shared "
"library on Ubuntu using a system package install of SuiteSparse "
"3.4.0. This package is broken and does not support the "
"construction of shared libraries (you can still build Ceres as "
"a static library). If you wish to build a shared version of Ceres "
"you should uninstall the system install of SuiteSparse "
"(libsuitesparse-dev) and perform a source install of SuiteSparse "
"(we recommend that you use the latest version), "
"see http://ceres-solver.org/building.html for more information.")
endif (BUILD_SHARED_LIBS AND
SUITESPARSE_IS_BROKEN_SHARED_LINKING_UBUNTU_SYSTEM_VERSION)
# By default, if all of SuiteSparse's dependencies are found, Ceres is
# built with SuiteSparse support.
message("-- Found SuiteSparse ${SUITESPARSE_VERSION}, "
"building with SuiteSparse.")
else (SUITESPARSE_FOUND)
# Disable use of SuiteSparse if it cannot be found and continue.
message("-- Did not find all SuiteSparse dependencies, disabling "
"SuiteSparse support.")
update_cache_variable(SUITESPARSE OFF)
list(APPEND CERES_COMPILE_OPTIONS CERES_NO_SUITESPARSE)
endif (SUITESPARSE_FOUND)
else (SUITESPARSE)
message("-- Building without SuiteSparse.")
list(APPEND CERES_COMPILE_OPTIONS CERES_NO_SUITESPARSE)
endif (SUITESPARSE)
# CXSparse.
if (CXSPARSE)
# Don't search with REQUIRED as we can continue without CXSparse.
find_package(CXSparse)
if (CXSPARSE_FOUND)
# By default, if CXSparse and all dependencies are found, Ceres is
# built with CXSparse support.
message("-- Found CXSparse version: ${CXSPARSE_VERSION}, "
"building with CXSparse.")
else (CXSPARSE_FOUND)
# Disable use of CXSparse if it cannot be found and continue.
message("-- Did not find CXSparse, Building without CXSparse.")
update_cache_variable(CXSPARSE OFF)
list(APPEND CERES_COMPILE_OPTIONS CERES_NO_CXSPARSE)
endif (CXSPARSE_FOUND)
else (CXSPARSE)
message("-- Building without CXSparse.")
list(APPEND CERES_COMPILE_OPTIONS CERES_NO_CXSPARSE)
# Mark as advanced (remove from default GUI view) the CXSparse search
# variables in case user enabled CXSPARSE, FindCXSparse did not find it, so
# made search variables visible in GUI for user to set, but then user disables
# CXSPARSE instead of setting them.
mark_as_advanced(FORCE CXSPARSE_INCLUDE_DIR
CXSPARSE_LIBRARY)
endif (CXSPARSE)
if (ACCELERATESPARSE)
find_package(AccelerateSparse)
if (AccelerateSparse_FOUND)
message("-- Found Apple's Accelerate framework with sparse solvers, "
"building with Accelerate sparse support.")
else()
message("-- Failed to find Apple's Accelerate framework with sparse solvers, "
"building without Accelerate sparse support.")
update_cache_variable(ACCELERATESPARSE OFF)
list(APPEND CERES_COMPILE_OPTIONS CERES_NO_ACCELERATE_SPARSE)
endif()
else()
message("-- Building without Apple's Accelerate sparse support.")
list(APPEND CERES_COMPILE_OPTIONS CERES_NO_ACCELERATE_SPARSE)
mark_as_advanced(FORCE AccelerateSparse_INCLUDE_DIR
AccelerateSparse_LIBRARY)
endif()
# Ensure that the user understands they have disabled all sparse libraries.
if (NOT SUITESPARSE AND NOT CXSPARSE AND NOT EIGENSPARSE AND NOT ACCELERATESPARSE)
message(" ===============================================================")
message(" Compiling without any sparse library: SuiteSparse, CXSparse ")
message(" EigenSparse & Apple's Accelerate are all disabled or unavailable. ")
message(" No sparse linear solvers (SPARSE_NORMAL_CHOLESKY & SPARSE_SCHUR)")
message(" will be available when Ceres is used.")
message(" ===============================================================")
endif()
# ANDROID define is set by the Android CMake toolchain file.
if (ANDROID)
message(" ================================================================")
if (ANDROID_STRIP_DEBUG_SYMBOLS)
# Strip debug information unconditionally to avoid +200MB library file sizes.
set( CMAKE_EXE_LINKER_FLAGS "${CMAKE_EXE_LINKER_FLAGS} -s" )
set( CMAKE_SHARED_LINKER_FLAGS "${CMAKE_SHARED_LINKER_FLAGS} -s" )
message(" Stripping debug information from Android build of Ceres library ")
message(" to avoid +200MB library files.")
else()
message(" Warning: not stripping debug information from Android build of ")
message(" Ceres library. This will result in a large (+200MB) library.")
endif()
message("")
message(" You can control whether debug information is stripped via the ")
message(" ANDROID_STRIP_DEBUG_SYMBOLS CMake option when configuring Ceres.")
message(" ================================================================")
endif()
# GFlags.
if (GFLAGS)
# Don't search with REQUIRED as we can continue without gflags.
find_package(gflags 2.2.0 CONFIG
HINTS "${HOMEBREW_INCLUDE_DIR_HINTS}")
if (gflags_FOUND)
message("-- Found Google Flags version ${gflags_VERSION}: ${GFLAGS_INCLUDE_DIR}")
else (gflags_FOUND)
message("-- Did not find Google Flags (gflags), Building without gflags "
"- no tests or tools will be built!")
update_cache_variable(GFLAGS OFF)
endif (gflags_FOUND)
else (GFLAGS)
message("-- Google Flags disabled; no tests or tools will be built!")
# Mark as advanced (remove from default GUI view) the gflags search
# variables in case user enabled GFLAGS, FindGflags did not find it, so
# made search variables visible in GUI for user to set, but then user disables
# GFLAGS instead of setting them.
mark_as_advanced(FORCE GFLAGS_INCLUDE_DIR
GFLAGS_LIBRARY
GFLAGS_NAMESPACE)
endif (GFLAGS)
# MiniGLog.
if (MINIGLOG)
message("-- Compiling minimal glog substitute into Ceres.")
set(GLOG_INCLUDE_DIRS internal/ceres/miniglog)
set(MINIGLOG_MAX_LOG_LEVEL 2 CACHE STRING "The maximum message severity level to be logged")
add_definitions("-DMAX_LOG_LEVEL=${MINIGLOG_MAX_LOG_LEVEL}")
message("-- Using minimal glog substitute (include): ${GLOG_INCLUDE_DIRS}")
message("-- Max log level for minimal glog substitute: ${MINIGLOG_MAX_LOG_LEVEL}")
# Mark as advanced (remove from default GUI view) the glog search
# variables in case user disables MINIGLOG, FindGlog did not find it, so
# made search variables visible in GUI for user to set, but then user enables
# MINIGLOG instead of setting them.
mark_as_advanced(FORCE GLOG_INCLUDE_DIR
GLOG_LIBRARY)
else (MINIGLOG)
unset(MINIGLOG_MAX_LOG_LEVEL CACHE)
# Don't search with REQUIRED so that configuration continues if not found and
# we can output an error messages explaining MINIGLOG option.
find_package(Glog)
if (NOT GLOG_FOUND)
message(FATAL_ERROR "Can't find Google Log (glog). Please set either: "
"glog_DIR (newer CMake built versions of glog) or GLOG_INCLUDE_DIR & "
"GLOG_LIBRARY or enable MINIGLOG option to use minimal glog "
"implementation.")
endif(NOT GLOG_FOUND)
# By default, assume gflags was found, updating the message if it was not.
set(GLOG_GFLAGS_DEPENDENCY_MESSAGE
" Assuming glog was built with gflags support as gflags was found. "
"This will make gflags a public dependency of Ceres.")
if (NOT gflags_FOUND)
set(GLOG_GFLAGS_DEPENDENCY_MESSAGE
" Assuming glog was NOT built with gflags support as gflags was "
"not found. If glog was built with gflags, please set the "
"gflags search locations such that it can be found by Ceres. "
"Otherwise, Ceres may fail to link due to missing gflags symbols.")
endif(NOT gflags_FOUND)
message("-- Found Google Log (glog)." ${GLOG_GFLAGS_DEPENDENCY_MESSAGE})
endif (MINIGLOG)
if (NOT SCHUR_SPECIALIZATIONS)
list(APPEND CERES_COMPILE_OPTIONS CERES_RESTRICT_SCHUR_SPECIALIZATION)
message("-- Disabling Schur specializations (faster compiles)")
endif (NOT SCHUR_SPECIALIZATIONS)
if (NOT CUSTOM_BLAS)
list(APPEND CERES_COMPILE_OPTIONS CERES_NO_CUSTOM_BLAS)
message("-- Disabling custom blas")
endif (NOT CUSTOM_BLAS)
set_ceres_threading_model("${CERES_THREADING_MODEL}")
if (BUILD_BENCHMARKS)
find_package(benchmark QUIET)
if (benchmark_FOUND)
message("-- Found Google benchmark library. Building Ceres benchmarks.")
else()
message("-- Failed to find Google benchmark library, disabling build of benchmarks.")
update_cache_variable(BUILD_BENCHMARKS OFF)
endif()
mark_as_advanced(benchmark_DIR)
endif()
if (BUILD_SHARED_LIBS)
message("-- Building Ceres as a shared library.")
# The CERES_BUILDING_SHARED_LIBRARY compile definition is NOT stored in
# CERES_COMPILE_OPTIONS as it must only be defined when Ceres is compiled
# not when it is used as it controls the CERES_EXPORT macro which provides
# dllimport/export support in MSVC.
add_definitions(-DCERES_BUILDING_SHARED_LIBRARY)
list(APPEND CERES_COMPILE_OPTIONS CERES_USING_SHARED_LIBRARY)
else (BUILD_SHARED_LIBS)
message("-- Building Ceres as a static library.")
endif (BUILD_SHARED_LIBS)
# Change the default build type from Debug to Release, while still
# supporting overriding the build type.
#
# The CACHE STRING logic here and elsewhere is needed to force CMake
# to pay attention to the value of these variables.
if (NOT CMAKE_BUILD_TYPE)
message("-- No build type specified; defaulting to CMAKE_BUILD_TYPE=Release.")
set(CMAKE_BUILD_TYPE Release CACHE STRING
"Choose the type of build, options are: None Debug Release RelWithDebInfo MinSizeRel."
FORCE)
else (NOT CMAKE_BUILD_TYPE)
if (CMAKE_BUILD_TYPE STREQUAL "Debug")
message("\n=================================================================================")
message("\n-- Build type: Debug. Performance will be terrible!")
message("-- Add -DCMAKE_BUILD_TYPE=Release to the CMake command line to get an optimized build.")
message("\n=================================================================================")
endif (CMAKE_BUILD_TYPE STREQUAL "Debug")
endif (NOT CMAKE_BUILD_TYPE)
if (MINGW)
# MinGW produces code that segfaults when performing matrix multiplications
# in Eigen when compiled with -O3 (see [1]), as such force the use of -O2
# which works.
#
# [1] http://eigen.tuxfamily.org/bz/show_bug.cgi?id=556
message("-- MinGW detected, forcing -O2 instead of -O3 in Release for Eigen due "
"to a MinGW bug: http://eigen.tuxfamily.org/bz/show_bug.cgi?id=556")
string(REPLACE "-O3" "-O2" CMAKE_CXX_FLAGS_RELEASE "${CMAKE_CXX_FLAGS_RELEASE}")
update_cache_variable(CMAKE_CXX_FLAGS_RELEASE "${CMAKE_CXX_FLAGS_RELEASE}")
endif (MINGW)
# After the tweaks for the compile settings, disable some warnings on MSVC.
if (MSVC)
# On MSVC, math constants are not included in <cmath> or <math.h> unless
# _USE_MATH_DEFINES is defined [1]. As we use M_PI in the examples, ensure
# that _USE_MATH_DEFINES is defined before the first inclusion of <cmath>.
#
# [1] https://msdn.microsoft.com/en-us/library/4hwaceh6.aspx
add_definitions("-D_USE_MATH_DEFINES")
# Disable signed/unsigned int conversion warnings.
add_compile_options("/wd4018" "/wd4267")
# Disable warning about using struct/class for the same symobl.
add_compile_options("/wd4099")
# Disable warning about the insecurity of using "std::copy".
add_compile_options("/wd4996")
# Disable performance warning about int-to-bool conversion.
add_compile_options("/wd4800")
# Disable performance warning about fopen insecurity.
add_compile_options("/wd4996")
# Disable warning about int64 to int32 conversion. Disabling
# this warning may not be correct; needs investigation.
# TODO(keir): Investigate these warnings in more detail.
add_compile_options("/wd4244")
# It's not possible to use STL types in DLL interfaces in a portable and
# reliable way. However, that's what happens with Google Log and Google Flags
# on Windows. MSVC gets upset about this and throws warnings that we can't do
# much about. The real solution is to link static versions of Google Log and
# Google Test, but that seems tricky on Windows. So, disable the warning.
add_compile_options("/wd4251")
# Add bigobj flag otherwise the build would fail due to large object files
# probably resulting from generated headers (like the fixed-size schur
# specializations).
add_compile_options("/bigobj")
# Google Flags doesn't have their DLL import/export stuff set up correctly,
# which results in linker warnings. This is irrelevant for Ceres, so ignore
# the warnings.
set(CMAKE_EXE_LINKER_FLAGS "${CMAKE_EXE_LINKER_FLAGS} /ignore:4049")
# Update the C/CXX flags for MSVC to use either the static or shared
# C-Run Time (CRT) library based on the user option: MSVC_USE_STATIC_CRT.
list(APPEND C_CXX_FLAGS
CMAKE_CXX_FLAGS
CMAKE_CXX_FLAGS_DEBUG
CMAKE_CXX_FLAGS_RELEASE
CMAKE_CXX_FLAGS_MINSIZEREL
CMAKE_CXX_FLAGS_RELWITHDEBINFO)
foreach(FLAG_VAR ${C_CXX_FLAGS})
if (MSVC_USE_STATIC_CRT)
# Use static CRT.
if (${FLAG_VAR} MATCHES "/MD")
string(REGEX REPLACE "/MD" "/MT" ${FLAG_VAR} "${${FLAG_VAR}}")
endif (${FLAG_VAR} MATCHES "/MD")
else (MSVC_USE_STATIC_CRT)
# Use shared, not static, CRT.
if (${FLAG_VAR} MATCHES "/MT")
string(REGEX REPLACE "/MT" "/MD" ${FLAG_VAR} "${${FLAG_VAR}}")
endif (${FLAG_VAR} MATCHES "/MT")
endif (MSVC_USE_STATIC_CRT)
endforeach()
# Tuple sizes of 10 are used by Gtest.
add_definitions("-D_VARIADIC_MAX=10")
include(CheckIfUnderscorePrefixedBesselFunctionsExist)
check_if_underscore_prefixed_bessel_functions_exist(
HAVE_UNDERSCORE_PREFIXED_BESSEL_FUNCTIONS)
if (HAVE_UNDERSCORE_PREFIXED_BESSEL_FUNCTIONS)
list(APPEND CERES_COMPILE_OPTIONS
CERES_MSVC_USE_UNDERSCORE_PREFIXED_BESSEL_FUNCTIONS)
endif()
endif (MSVC)
if (UNIX)
# Flags which we add to GCC to make it more picky about stuff
# we do care about,
add_cxx_compiler_flag_if_supported(CERES_STRICT_CXX_FLAGS
-Wmissing-declarations)
# Flags which we add to GCC to silence lots of annoying false-positives.
add_cxx_compiler_flag_if_supported(CERES_STRICT_CXX_FLAGS
-Wno-unknown-pragmas)
add_cxx_compiler_flag_if_supported(CERES_STRICT_CXX_FLAGS
-Wno-sign-compare)
add_cxx_compiler_flag_if_supported(CERES_STRICT_CXX_FLAGS
-Wno-unused-parameter)
add_cxx_compiler_flag_if_supported(CERES_STRICT_CXX_FLAGS
-Wno-missing-field-initializers)
set(CMAKE_CXX_FLAGS "${CMAKE_CXX_FLAGS} ${CERES_STRICT_CXX_FLAGS}")
endif (UNIX)
# Use a larger inlining threshold for Clang, since it hobbles Eigen,
# resulting in an unreasonably slow version of the blas routines. The
# -Qunused-arguments is needed because CMake passes the inline
# threshold to the linker and clang complains about it and dies.
if (CMAKE_CXX_COMPILER_ID MATCHES "Clang") # Matches Clang & AppleClang.
set(CMAKE_CXX_FLAGS
"${CMAKE_CXX_FLAGS} -Qunused-arguments -mllvm -inline-threshold=600")
# Older versions of Clang (<= 2.9) do not support the 'return-type-c-linkage'
# option, so check for its presence before adding it to the default flags set.
include(CheckCXXCompilerFlag)
check_cxx_compiler_flag("-Wno-return-type-c-linkage"
HAVE_RETURN_TYPE_C_LINKAGE)
if (HAVE_RETURN_TYPE_C_LINKAGE)
set(CMAKE_CXX_FLAGS "${CMAKE_CXX_FLAGS} -Wno-return-type-c-linkage")
endif(HAVE_RETURN_TYPE_C_LINKAGE)
endif ()
# Configure the Ceres config.h compile options header using the current
# compile options and put the configured header into the Ceres build
# directory. Note that the ceres/internal subdir in <build>/config where
# the configured config.h is placed is important, because Ceres will be
# built against this configured header, it needs to have the same relative
# include path as it would if it were in the source tree (or installed).
list(REMOVE_DUPLICATES CERES_COMPILE_OPTIONS)
include(CreateCeresConfig)
create_ceres_config("${CERES_COMPILE_OPTIONS}"
${Ceres_BINARY_DIR}/config/ceres/internal)
add_subdirectory(internal/ceres)
if (BUILD_DOCUMENTATION)
set(CERES_DOCS_INSTALL_DIR "share/doc/ceres" CACHE STRING
"Ceres docs install path relative to CMAKE_INSTALL_PREFIX")
find_package(Sphinx QUIET)
if (NOT SPHINX_FOUND)
message("-- Failed to find Sphinx, disabling build of documentation.")
update_cache_variable(BUILD_DOCUMENTATION OFF)
else()
# Generate the User's Guide (html).
# The corresponding target is ceres_docs, but is included in ALL.
message("-- Build the HTML documentation.")
add_subdirectory(docs)
endif()
endif (BUILD_DOCUMENTATION)
if (BUILD_EXAMPLES)
message("-- Build the examples.")
add_subdirectory(examples)
else (BUILD_EXAMPLES)
message("-- Do not build any example.")
endif (BUILD_EXAMPLES)
# Setup installation of Ceres public headers.
file(GLOB CERES_HDRS ${Ceres_SOURCE_DIR}/include/ceres/*.h)
install(FILES ${CERES_HDRS} DESTINATION include/ceres)
file(GLOB CERES_PUBLIC_INTERNAL_HDRS ${Ceres_SOURCE_DIR}/include/ceres/internal/*.h)
install(FILES ${CERES_PUBLIC_INTERNAL_HDRS} DESTINATION include/ceres/internal)
# Ceres codegen headers
file(GLOB CERES_PUBLIC_CODEGEN_HDRS ${Ceres_SOURCE_DIR}/include/ceres/codegen/*.h)
install(FILES ${CERES_PUBLIC_CODEGEN_HDRS} DESTINATION include/ceres/codegen)
file(GLOB CERES_PUBLIC_CODEGEN_INTERNAL_HDRS ${Ceres_SOURCE_DIR}/include/ceres/codegen/internal/*.h)
install(FILES ${CERES_PUBLIC_CODEGEN_INTERNAL_HDRS} DESTINATION include/ceres/codegen/internal)
# Also setup installation of Ceres config.h configured with the current
# build options into the installed headers directory.
install(FILES ${Ceres_BINARY_DIR}/config/ceres/internal/config.h
DESTINATION include/ceres/internal)
if (MINIGLOG)
# Install miniglog header if being used as logging #includes appear in
# installed public Ceres headers.
install(FILES ${Ceres_SOURCE_DIR}/internal/ceres/miniglog/glog/logging.h
DESTINATION include/ceres/internal/miniglog/glog)
endif (MINIGLOG)
# Ceres supports two mechanisms by which it can be detected & imported into
# client code which uses CMake via find_package(Ceres):
#
# 1) Installation (e.g. to /usr/local), using CMake's install() function.
#
# 2) (Optional) Export of the current build directory into the local CMake
# package registry, using CMake's export() function. This allows use of
# Ceres from other projects without requiring installation.
#
# In both cases, we need to generate a configured CeresConfig.cmake which
# includes additional autogenerated files which in concert create an imported
# target for Ceres in a client project when find_package(Ceres) is invoked.
# The key distinctions are where this file is located, and whether client code
# references installed copies of the compiled Ceres headers/libraries,
# (option #1: installation), or the originals in the source/build directories
# (option #2: export of build directory).
#
# NOTE: If Ceres is both exported and installed, provided that the installation
# path is present in CMAKE_MODULE_PATH when find_package(Ceres) is called,
# the installed version is preferred.
# Build the list of Ceres components for CeresConfig.cmake from the current set
# of compile options.
include(CeresCompileOptionsToComponents)
ceres_compile_options_to_components("${CERES_COMPILE_OPTIONS}"
CERES_COMPILED_COMPONENTS)
include(CMakePackageConfigHelpers)
# Create a CeresConfigVersion.cmake file containing the version information,
# used by both export() & install().
write_basic_package_version_file("${Ceres_BINARY_DIR}/CeresConfigVersion.cmake"
VERSION ${CERES_VERSION}
COMPATIBILITY SameMajorVersion)
# Install method #1: Put Ceres in CMAKE_INSTALL_PREFIX: /usr/local or equivalent.
# Set the install path for the installed CeresConfig.cmake configuration file
# relative to CMAKE_INSTALL_PREFIX.
if (WIN32)
set(RELATIVE_CMAKECONFIG_INSTALL_DIR CMake)
else ()
set(RELATIVE_CMAKECONFIG_INSTALL_DIR lib${LIB_SUFFIX}/cmake/Ceres)
endif ()
# This "exports" for installation all targets which have been put into the
# export set "CeresExport". This generates a CeresTargets.cmake file which,
# when read in by a client project as part of find_package(Ceres) creates
# imported library targets for Ceres (with dependency relations) which can be
# used in target_link_libraries() calls in the client project to use Ceres.
install(EXPORT CeresExport
DESTINATION ${RELATIVE_CMAKECONFIG_INSTALL_DIR} FILE CeresTargets.cmake)
# Save the relative path from the installed CeresConfig.cmake file to the
# install prefix. We do not save an absolute path in case the installed package
# is subsequently relocated after installation (on Windows).
file(RELATIVE_PATH INSTALL_ROOT_REL_CONFIG_INSTALL_DIR
${CMAKE_INSTALL_PREFIX}/${RELATIVE_CMAKECONFIG_INSTALL_DIR}
${CMAKE_INSTALL_PREFIX})
# Configure a CeresConfig.cmake file for an installed version of Ceres from the
# template, reflecting the current build options.
#
# NOTE: The -install suffix is necessary to distinguish the install version from
# the exported version, which must be named CeresConfig.cmake in
# Ceres_BINARY_DIR to be detected. The suffix is removed when
# it is installed.
set(SETUP_CERES_CONFIG_FOR_INSTALLATION TRUE)
configure_file("${Ceres_SOURCE_DIR}/cmake/CeresConfig.cmake.in"
"${Ceres_BINARY_DIR}/CeresConfig-install.cmake" @ONLY)
# Install the configuration files into the same directory as the autogenerated
# CeresTargets.cmake file. We include the find_package() scripts for libraries
# whose headers are included in the public API of Ceres and should thus be
# present in CERES_INCLUDE_DIRS.
install(FILES "${Ceres_BINARY_DIR}/CeresConfig-install.cmake"
RENAME CeresConfig.cmake
DESTINATION ${RELATIVE_CMAKECONFIG_INSTALL_DIR})
install(FILES "${Ceres_BINARY_DIR}/CeresConfigVersion.cmake"
"${Ceres_SOURCE_DIR}/cmake/FindGlog.cmake"
DESTINATION ${RELATIVE_CMAKECONFIG_INSTALL_DIR})
if (PROVIDE_UNINSTALL_TARGET)
# Create an uninstall target to remove all installed files.
configure_file("${Ceres_SOURCE_DIR}/cmake/uninstall.cmake.in"
"${Ceres_BINARY_DIR}/cmake/uninstall.cmake"
@ONLY)
add_custom_target(uninstall
COMMAND ${CMAKE_COMMAND} -P ${Ceres_BINARY_DIR}/cmake/uninstall.cmake)
endif()
# Install method #2: Put Ceres build into local CMake registry.
#
# Optionally export the Ceres build directory into the local CMake package
# registry (~/.cmake/packages on *nix & OS X). This allows the detection &
# use of Ceres without requiring that it be installed.
if (EXPORT_BUILD_DIR)
message("-- Export Ceres build directory to local CMake package registry.")
# Save the relative path from the build directory to the source directory.
file(RELATIVE_PATH INSTALL_ROOT_REL_CONFIG_INSTALL_DIR
${Ceres_BINARY_DIR}
${Ceres_SOURCE_DIR})
# Analogously to install(EXPORT ...), export the Ceres target from the build
# directory as a package called Ceres into the local CMake package registry.
export(TARGETS ceres FILE ${Ceres_BINARY_DIR}/CeresTargets.cmake)
export(PACKAGE ${CMAKE_PROJECT_NAME})
# Configure a CeresConfig.cmake file for the export of the Ceres build
# directory from the template, reflecting the current build options.
set(SETUP_CERES_CONFIG_FOR_INSTALLATION FALSE)
configure_file("${Ceres_SOURCE_DIR}/cmake/CeresConfig.cmake.in"
"${Ceres_BINARY_DIR}/CeresConfig.cmake" @ONLY)
endif (EXPORT_BUILD_DIR)