| // Ceres Solver - A fast non-linear least squares minimizer |
| // Copyright 2024 Google Inc. All rights reserved. |
| // http://ceres-solver.org/ |
| // |
| // Redistribution and use in source and binary forms, with or without |
| // modification, are permitted provided that the following conditions are met: |
| // |
| // * Redistributions of source code must retain the above copyright notice, |
| // this list of conditions and the following disclaimer. |
| // * Redistributions in binary form must reproduce the above copyright notice, |
| // this list of conditions and the following disclaimer in the documentation |
| // and/or other materials provided with the distribution. |
| // * Neither the name of Google Inc. nor the names of its contributors may be |
| // used to endorse or promote products derived from this software without |
| // specific prior written permission. |
| // |
| // THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" |
| // AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE |
| // IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE |
| // ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE |
| // LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR |
| // CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF |
| // SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS |
| // INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN |
| // CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) |
| // ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE |
| // POSSIBILITY OF SUCH DAMAGE. |
| // |
| // Author: keir@google.com (Keir Mierle) |
| |
| #include "ceres/jet.h" |
| |
| #include <Eigen/Dense> |
| #include <algorithm> |
| #include <cfenv> |
| #include <cmath> |
| |
| #include "ceres/stringprintf.h" |
| #include "ceres/test_util.h" |
| #include "glog/logging.h" |
| #include "gmock/gmock.h" |
| #include "gtest/gtest.h" |
| |
| // The floating-point environment access and modification is only meaningful |
| // with the following pragma. |
| #ifdef _MSC_VER |
| #pragma float_control(precise, on, push) |
| #pragma fenv_access(on) |
| #elif !(defined(__ARM_ARCH) && __ARM_ARCH >= 8) && !defined(__MINGW32__) |
| // NOTE: FENV_ACCESS cannot be set to ON when targeting arm(v8) and MinGW |
| #pragma STDC FENV_ACCESS ON |
| #else |
| #define CERES_NO_FENV_ACCESS |
| #endif |
| |
| namespace ceres::internal { |
| |
| namespace { |
| |
| constexpr double kE = 2.71828182845904523536; |
| |
| using J = Jet<double, 2>; |
| // Don't care about the dual part for scalar part categorization and comparison |
| // tests |
| template <typename T> |
| using J0 = Jet<T, 0>; |
| using J0d = J0<double>; |
| |
| // Convenient shorthand for making a jet. |
| J MakeJet(double a, double v0, double v1) { |
| J z; |
| z.a = a; |
| z.v[0] = v0; |
| z.v[1] = v1; |
| return z; |
| } |
| |
| constexpr double kTolerance = 1e-13; |
| |
| // Stores the floating-point environment containing active floating-point |
| // exceptions, rounding mode, etc., and restores it upon destruction. |
| // |
| // Useful for avoiding side-effects. |
| class Fenv { |
| public: |
| Fenv() { std::fegetenv(&e); } |
| ~Fenv() { std::fesetenv(&e); } |
| |
| Fenv(const Fenv&) = delete; |
| Fenv& operator=(const Fenv&) = delete; |
| |
| private: |
| std::fenv_t e; |
| }; |
| |
| bool AreAlmostEqual(double x, double y, double max_abs_relative_difference) { |
| if (std::isnan(x) && std::isnan(y)) { |
| return true; |
| } |
| |
| if (std::isinf(x) && std::isinf(y)) { |
| return (std::signbit(x) == std::signbit(y)); |
| } |
| |
| Fenv env; // Do not leak floating-point exceptions to the caller |
| double absolute_difference = std::abs(x - y); |
| double relative_difference = |
| absolute_difference / std::max(std::abs(x), std::abs(y)); |
| |
| if (std::fpclassify(x) == FP_ZERO || std::fpclassify(y) == FP_ZERO) { |
| // If x or y is exactly zero, then relative difference doesn't have any |
| // meaning. Take the absolute difference instead. |
| relative_difference = absolute_difference; |
| } |
| return std::islessequal(relative_difference, max_abs_relative_difference); |
| } |
| |
| MATCHER_P2(IsAlmostEqualToWithTolerance, |
| y, |
| tolerance, |
| "is almost equal to " + testing::PrintToString(y) + |
| " with tolerance " + testing::PrintToString(tolerance)) { |
| const bool result = (AreAlmostEqual(arg.a, y.a, tolerance) && |
| AreAlmostEqual(arg.v[0], y.v[0], tolerance) && |
| AreAlmostEqual(arg.v[1], y.v[1], tolerance)); |
| if (!result) { |
| *result_listener << "\nexpected - actual : " << y - arg; |
| } |
| return result; |
| } |
| |
| MATCHER_P(IsAlmostEqualTo, y, "") { |
| return ExplainMatchResult( |
| IsAlmostEqualToWithTolerance(y, kTolerance), arg, result_listener); |
| } |
| |
| const double kStep = 1e-8; |
| const double kNumericalTolerance = 1e-6; // Numeric derivation is quite inexact |
| |
| // Differentiate using Jet and confirm results with numerical derivation. |
| template <typename Function> |
| void NumericalTest(const char* name, const Function& f, const double x) { |
| const double exact_dx = f(MakeJet(x, 1.0, 0.0)).v[0]; |
| const double estimated_dx = |
| (f(J(x + kStep)).a - f(J(x - kStep)).a) / (2.0 * kStep); |
| VLOG(1) << name << "(" << x << "), exact dx: " << exact_dx |
| << ", estimated dx: " << estimated_dx; |
| ExpectClose(exact_dx, estimated_dx, kNumericalTolerance); |
| } |
| |
| // Same as NumericalTest, but given a function taking two arguments. |
| template <typename Function> |
| void NumericalTest2(const char* name, |
| const Function& f, |
| const double x, |
| const double y) { |
| const J exact_delta = f(MakeJet(x, 1.0, 0.0), MakeJet(y, 0.0, 1.0)); |
| const double exact_dx = exact_delta.v[0]; |
| const double exact_dy = exact_delta.v[1]; |
| |
| // Sanity check - these should be equivalent: |
| EXPECT_EQ(exact_dx, f(MakeJet(x, 1.0, 0.0), MakeJet(y, 0.0, 0.0)).v[0]); |
| EXPECT_EQ(exact_dx, f(MakeJet(x, 0.0, 1.0), MakeJet(y, 0.0, 0.0)).v[1]); |
| EXPECT_EQ(exact_dy, f(MakeJet(x, 0.0, 0.0), MakeJet(y, 1.0, 0.0)).v[0]); |
| EXPECT_EQ(exact_dy, f(MakeJet(x, 0.0, 0.0), MakeJet(y, 0.0, 1.0)).v[1]); |
| |
| const double estimated_dx = |
| (f(J(x + kStep), J(y)).a - f(J(x - kStep), J(y)).a) / (2.0 * kStep); |
| const double estimated_dy = |
| (f(J(x), J(y + kStep)).a - f(J(x), J(y - kStep)).a) / (2.0 * kStep); |
| VLOG(1) << name << "(" << x << ", " << y << "), exact dx: " << exact_dx |
| << ", estimated dx: " << estimated_dx; |
| ExpectClose(exact_dx, estimated_dx, kNumericalTolerance); |
| VLOG(1) << name << "(" << x << ", " << y << "), exact dy: " << exact_dy |
| << ", estimated dy: " << estimated_dy; |
| ExpectClose(exact_dy, estimated_dy, kNumericalTolerance); |
| } |
| |
| } // namespace |
| |
| // Pick arbitrary values for x and y. |
| const J x = MakeJet(2.3, -2.7, 1e-3); |
| const J y = MakeJet(1.7, 0.5, 1e+2); |
| const J z = MakeJet(1e-6, 1e-4, 1e-2); |
| |
| TEST(Jet, Elementary) { |
| EXPECT_THAT((x * y) / x, IsAlmostEqualTo(y)); |
| EXPECT_THAT(sqrt(x * x), IsAlmostEqualTo(x)); |
| EXPECT_THAT(sqrt(y) * sqrt(y), IsAlmostEqualTo(y)); |
| |
| NumericalTest("sqrt", sqrt<double, 2>, 0.00001); |
| NumericalTest("sqrt", sqrt<double, 2>, 1.0); |
| |
| EXPECT_THAT(x + 1.0, IsAlmostEqualTo(1.0 + x)); |
| { |
| J c = x; |
| c += 1.0; |
| EXPECT_THAT(c, IsAlmostEqualTo(1.0 + x)); |
| } |
| |
| EXPECT_THAT(-(x - 1.0), IsAlmostEqualTo(1.0 - x)); |
| { |
| J c = x; |
| c -= 1.0; |
| EXPECT_THAT(c, IsAlmostEqualTo(x - 1.0)); |
| } |
| |
| EXPECT_THAT((x * 5.0) / 5.0, IsAlmostEqualTo((x / 5.0) * 5.0)); |
| EXPECT_THAT((x * 5.0) / 5.0, IsAlmostEqualTo(x)); |
| EXPECT_THAT((x / 5.0) * 5.0, IsAlmostEqualTo(x)); |
| |
| { |
| J c = x; |
| c /= 5.0; |
| J d = x; |
| d *= 5.0; |
| EXPECT_THAT(c, IsAlmostEqualTo(x / 5.0)); |
| EXPECT_THAT(d, IsAlmostEqualTo(5.0 * x)); |
| } |
| |
| EXPECT_THAT(1.0 / (y / x), IsAlmostEqualTo(x / y)); |
| } |
| |
| TEST(Jet, Trigonometric) { |
| EXPECT_THAT(cos(2.0 * x), IsAlmostEqualTo(cos(x) * cos(x) - sin(x) * sin(x))); |
| EXPECT_THAT(sin(2.0 * x), IsAlmostEqualTo(2.0 * sin(x) * cos(x))); |
| EXPECT_THAT(sin(x) * sin(x) + cos(x) * cos(x), IsAlmostEqualTo(J(1.0))); |
| |
| { |
| J t = MakeJet(0.7, -0.3, +1.5); |
| J r = MakeJet(2.3, 0.13, -2.4); |
| EXPECT_THAT(atan2(r * sin(t), r * cos(t)), IsAlmostEqualTo(t)); |
| } |
| |
| EXPECT_THAT(sin(x) / cos(x), IsAlmostEqualTo(tan(x))); |
| EXPECT_THAT(tan(atan(x)), IsAlmostEqualTo(x)); |
| |
| { |
| J a = MakeJet(0.1, -2.7, 1e-3); |
| EXPECT_THAT(cos(acos(a)), IsAlmostEqualTo(a)); |
| EXPECT_THAT(acos(cos(a)), IsAlmostEqualTo(a)); |
| |
| J b = MakeJet(0.6, 0.5, 1e+2); |
| EXPECT_THAT(cos(acos(b)), IsAlmostEqualTo(b)); |
| EXPECT_THAT(acos(cos(b)), IsAlmostEqualTo(b)); |
| } |
| |
| { |
| J a = MakeJet(0.1, -2.7, 1e-3); |
| EXPECT_THAT(sin(asin(a)), IsAlmostEqualTo(a)); |
| EXPECT_THAT(asin(sin(a)), IsAlmostEqualTo(a)); |
| |
| J b = MakeJet(0.4, 0.5, 1e+2); |
| EXPECT_THAT(sin(asin(b)), IsAlmostEqualTo(b)); |
| EXPECT_THAT(asin(sin(b)), IsAlmostEqualTo(b)); |
| } |
| } |
| |
| TEST(Jet, Hyperbolic) { |
| // cosh(x)*cosh(x) - sinh(x)*sinh(x) = 1 |
| EXPECT_THAT(cosh(x) * cosh(x) - sinh(x) * sinh(x), IsAlmostEqualTo(J(1.0))); |
| |
| // tanh(x + y) = (tanh(x) + tanh(y)) / (1 + tanh(x) tanh(y)) |
| EXPECT_THAT( |
| tanh(x + y), |
| IsAlmostEqualTo((tanh(x) + tanh(y)) / (J(1.0) + tanh(x) * tanh(y)))); |
| } |
| |
| TEST(Jet, Abs) { |
| EXPECT_THAT(abs(-x * x), IsAlmostEqualTo(x * x)); |
| EXPECT_THAT(abs(-x), IsAlmostEqualTo(sqrt(x * x))); |
| |
| { |
| J a = MakeJet(-std::numeric_limits<double>::quiet_NaN(), 2.0, 4.0); |
| J b = abs(a); |
| EXPECT_TRUE(std::signbit(b.v[0])); |
| EXPECT_TRUE(std::signbit(b.v[1])); |
| } |
| } |
| |
| #if defined(CERES_HAS_POSIX_BESSEL_FUNCTIONS) || \ |
| defined(CERES_HAS_CPP17_BESSEL_FUNCTIONS) |
| TEST(Jet, Bessel) { |
| J zero = J(0.0); |
| J z = MakeJet(0.1, -2.7, 1e-3); |
| |
| #ifdef CERES_HAS_POSIX_BESSEL_FUNCTIONS |
| EXPECT_THAT(BesselJ0(zero), IsAlmostEqualTo(J(1.0))); |
| EXPECT_THAT(BesselJ1(zero), IsAlmostEqualTo(zero)); |
| EXPECT_THAT(BesselJn(2, zero), IsAlmostEqualTo(zero)); |
| EXPECT_THAT(BesselJn(3, zero), IsAlmostEqualTo(zero)); |
| |
| EXPECT_THAT(BesselJ0(z), IsAlmostEqualTo(BesselJn(0, z))); |
| EXPECT_THAT(BesselJ1(z), IsAlmostEqualTo(BesselJn(1, z))); |
| |
| // See formula http://dlmf.nist.gov/10.6.E1 |
| EXPECT_THAT(BesselJ0(z) + BesselJn(2, z), |
| IsAlmostEqualTo((2.0 / z) * BesselJ1(z))); |
| #endif // CERES_HAS_POSIX_BESSEL_FUNCTIONS |
| |
| #ifdef CERES_HAS_CPP17_BESSEL_FUNCTIONS |
| EXPECT_THAT(cyl_bessel_j(0, zero), IsAlmostEqualTo(J(1.0))); |
| EXPECT_THAT(cyl_bessel_j(1, zero), IsAlmostEqualTo(zero)); |
| EXPECT_THAT(cyl_bessel_j(2, zero), IsAlmostEqualTo(zero)); |
| EXPECT_THAT(cyl_bessel_j(3, zero), IsAlmostEqualTo(zero)); |
| |
| EXPECT_THAT(cyl_bessel_j(0, z), IsAlmostEqualTo(BesselJn(0, z))); |
| EXPECT_THAT(cyl_bessel_j(1, z), IsAlmostEqualTo(BesselJn(1, z))); |
| |
| // MSVC Bessel functions and their derivatives produce errors slightly above |
| // kTolerance. Provide an alternative variant with a relaxed threshold. |
| constexpr double kRelaxedTolerance = 10 * kTolerance; |
| |
| // See formula http://dlmf.nist.gov/10.6.E1 |
| EXPECT_THAT(cyl_bessel_j(0, z) + cyl_bessel_j(2, z), |
| IsAlmostEqualToWithTolerance((2.0 / z) * cyl_bessel_j(1, z), |
| kRelaxedTolerance)); |
| |
| // MSVC does not throw an exception on invalid first argument |
| #ifndef _MSC_VER |
| EXPECT_THROW(cyl_bessel_j(-1, zero), std::domain_error); |
| #endif // defined(_MSC_VER) |
| #endif // defined(CERES_HAS_CPP17_BESSEL_FUNCTIONS) |
| } |
| #endif // defined(CERES_HAS_POSIX_BESSEL_FUNCTIONS) || |
| // defined(CERES_HAS_CPP17_BESSEL_FUNCTIONS) |
| |
| TEST(Jet, Floor) { |
| { // floor of a positive number works. |
| J a = MakeJet(0.1, -2.7, 1e-3); |
| J b = floor(a); |
| J expected = MakeJet(floor(a.a), 0.0, 0.0); |
| EXPECT_EQ(expected, b); |
| } |
| |
| { // floor of a negative number works. |
| J a = MakeJet(-1.1, -2.7, 1e-3); |
| J b = floor(a); |
| J expected = MakeJet(floor(a.a), 0.0, 0.0); |
| EXPECT_EQ(expected, b); |
| } |
| |
| { // floor of a positive number works. |
| J a = MakeJet(10.123, -2.7, 1e-3); |
| J b = floor(a); |
| J expected = MakeJet(floor(a.a), 0.0, 0.0); |
| EXPECT_EQ(expected, b); |
| } |
| } |
| |
| TEST(Jet, Ceil) { |
| { // ceil of a positive number works. |
| J a = MakeJet(0.1, -2.7, 1e-3); |
| J b = ceil(a); |
| J expected = MakeJet(ceil(a.a), 0.0, 0.0); |
| EXPECT_EQ(expected, b); |
| } |
| |
| { // ceil of a negative number works. |
| J a = MakeJet(-1.1, -2.7, 1e-3); |
| J b = ceil(a); |
| J expected = MakeJet(ceil(a.a), 0.0, 0.0); |
| EXPECT_EQ(expected, b); |
| } |
| |
| { // ceil of a positive number works. |
| J a = MakeJet(10.123, -2.7, 1e-3); |
| J b = ceil(a); |
| J expected = MakeJet(ceil(a.a), 0.0, 0.0); |
| EXPECT_EQ(expected, b); |
| } |
| } |
| |
| TEST(Jet, Erf) { |
| { // erf works. |
| J a = MakeJet(10.123, -2.7, 1e-3); |
| J b = erf(a); |
| J expected = MakeJet(erf(a.a), 0.0, 0.0); |
| EXPECT_EQ(expected, b); |
| } |
| NumericalTest("erf", erf<double, 2>, -1.0); |
| NumericalTest("erf", erf<double, 2>, 1e-5); |
| NumericalTest("erf", erf<double, 2>, 0.5); |
| NumericalTest("erf", erf<double, 2>, 100.0); |
| } |
| |
| TEST(Jet, Erfc) { |
| { // erfc works. |
| J a = MakeJet(10.123, -2.7, 1e-3); |
| J b = erfc(a); |
| J expected = MakeJet(erfc(a.a), 0.0, 0.0); |
| EXPECT_EQ(expected, b); |
| } |
| NumericalTest("erfc", erfc<double, 2>, -1.0); |
| NumericalTest("erfc", erfc<double, 2>, 1e-5); |
| NumericalTest("erfc", erfc<double, 2>, 0.5); |
| NumericalTest("erfc", erfc<double, 2>, 100.0); |
| } |
| |
| TEST(Jet, Cbrt) { |
| EXPECT_THAT(cbrt(x * x * x), IsAlmostEqualTo(x)); |
| EXPECT_THAT(cbrt(y) * cbrt(y) * cbrt(y), IsAlmostEqualTo(y)); |
| EXPECT_THAT(cbrt(x), IsAlmostEqualTo(pow(x, 1.0 / 3.0))); |
| |
| NumericalTest("cbrt", cbrt<double, 2>, -1.0); |
| NumericalTest("cbrt", cbrt<double, 2>, -1e-5); |
| NumericalTest("cbrt", cbrt<double, 2>, 1e-5); |
| NumericalTest("cbrt", cbrt<double, 2>, 1.0); |
| } |
| |
| TEST(Jet, Log1p) { |
| EXPECT_THAT(log1p(expm1(x)), IsAlmostEqualTo(x)); |
| EXPECT_THAT(log1p(x), IsAlmostEqualTo(log(J{1} + x))); |
| |
| { // log1p(x) does not loose precision for small x |
| J x = MakeJet(1e-16, 1e-8, 1e-4); |
| EXPECT_THAT(log1p(x), |
| IsAlmostEqualTo(MakeJet(9.9999999999999998e-17, 1e-8, 1e-4))); |
| // log(1 + x) collapses to 0 |
| J v = log(J{1} + x); |
| EXPECT_TRUE(v.a == 0); |
| } |
| } |
| |
| TEST(Jet, Expm1) { |
| EXPECT_THAT(expm1(log1p(x)), IsAlmostEqualTo(x)); |
| EXPECT_THAT(expm1(x), IsAlmostEqualTo(exp(x) - 1.0)); |
| |
| { // expm1(x) does not loose precision for small x |
| J x = MakeJet(9.9999999999999998e-17, 1e-8, 1e-4); |
| EXPECT_THAT(expm1(x), IsAlmostEqualTo(MakeJet(1e-16, 1e-8, 1e-4))); |
| // exp(x) - 1 collapses to 0 |
| J v = exp(x) - J{1}; |
| EXPECT_TRUE(v.a == 0); |
| } |
| } |
| |
| TEST(Jet, Exp2) { |
| EXPECT_THAT(exp2(x), IsAlmostEqualTo(exp(x * log(2.0)))); |
| NumericalTest("exp2", exp2<double, 2>, -1.0); |
| NumericalTest("exp2", exp2<double, 2>, -1e-5); |
| NumericalTest("exp2", exp2<double, 2>, -1e-200); |
| NumericalTest("exp2", exp2<double, 2>, 0.0); |
| NumericalTest("exp2", exp2<double, 2>, 1e-200); |
| NumericalTest("exp2", exp2<double, 2>, 1e-5); |
| NumericalTest("exp2", exp2<double, 2>, 1.0); |
| } |
| |
| TEST(Jet, Log) { EXPECT_THAT(log(exp(x)), IsAlmostEqualTo(x)); } |
| |
| TEST(Jet, Log10) { |
| EXPECT_THAT(log10(x), IsAlmostEqualTo(log(x) / log(10))); |
| NumericalTest("log10", log10<double, 2>, 1e-5); |
| NumericalTest("log10", log10<double, 2>, 1.0); |
| NumericalTest("log10", log10<double, 2>, 98.76); |
| } |
| |
| TEST(Jet, Log2) { |
| EXPECT_THAT(log2(x), IsAlmostEqualTo(log(x) / log(2))); |
| NumericalTest("log2", log2<double, 2>, 1e-5); |
| NumericalTest("log2", log2<double, 2>, 1.0); |
| NumericalTest("log2", log2<double, 2>, 100.0); |
| } |
| |
| TEST(Jet, Norm) { |
| EXPECT_THAT(norm(x), IsAlmostEqualTo(x * x)); |
| EXPECT_THAT(norm(-x), IsAlmostEqualTo(x * x)); |
| } |
| |
| TEST(Jet, Pow) { |
| EXPECT_THAT(pow(x, 1.0), IsAlmostEqualTo(x)); |
| EXPECT_THAT(pow(x, MakeJet(1.0, 0.0, 0.0)), IsAlmostEqualTo(x)); |
| EXPECT_THAT(pow(kE, log(x)), IsAlmostEqualTo(x)); |
| EXPECT_THAT(pow(MakeJet(kE, 0., 0.), log(x)), IsAlmostEqualTo(x)); |
| EXPECT_THAT(pow(x, y), |
| IsAlmostEqualTo(pow(MakeJet(kE, 0.0, 0.0), y * log(x)))); |
| |
| // Specially cases |
| |
| // pow(0, y) == 0 for y > 1, with both arguments Jets. |
| EXPECT_THAT(pow(MakeJet(0, 1, 2), MakeJet(2, 3, 4)), |
| IsAlmostEqualTo(MakeJet(0, 0, 0))); |
| |
| // pow(0, y) == 0 for y == 1, with both arguments Jets. |
| EXPECT_THAT(pow(MakeJet(0, 1, 2), MakeJet(1, 3, 4)), |
| IsAlmostEqualTo(MakeJet(0, 1, 2))); |
| |
| // pow(0, <1) is not finite, with both arguments Jets. |
| { |
| for (int i = 1; i < 10; i++) { |
| J a = MakeJet(0, 1, 2); |
| J b = MakeJet(i * 0.1, 3, 4); // b = 0.1 ... 0.9 |
| J c = pow(a, b); |
| EXPECT_EQ(c.a, 0.0) << "\na: " << a << "\nb: " << b << "\na^b: " << c; |
| EXPECT_FALSE(isfinite(c.v[0])) |
| << "\na: " << a << "\nb: " << b << "\na^b: " << c; |
| EXPECT_FALSE(isfinite(c.v[1])) |
| << "\na: " << a << "\nb: " << b << "\na^b: " << c; |
| } |
| |
| for (int i = -10; i < 0; i++) { |
| J a = MakeJet(0, 1, 2); |
| J b = MakeJet(i * 0.1, 3, 4); // b = -1,-0.9 ... -0.1 |
| J c = pow(a, b); |
| EXPECT_FALSE(isfinite(c.a)) |
| << "\na: " << a << "\nb: " << b << "\na^b: " << c; |
| EXPECT_FALSE(isfinite(c.v[0])) |
| << "\na: " << a << "\nb: " << b << "\na^b: " << c; |
| EXPECT_FALSE(isfinite(c.v[1])) |
| << "\na: " << a << "\nb: " << b << "\na^b: " << c; |
| } |
| |
| // The special case of 0^0 = 1 defined by the C standard. |
| { |
| J a = MakeJet(0, 1, 2); |
| J b = MakeJet(0, 3, 4); |
| J c = pow(a, b); |
| EXPECT_EQ(c.a, 1.0) << "\na: " << a << "\nb: " << b << "\na^b: " << c; |
| EXPECT_FALSE(isfinite(c.v[0])) |
| << "\na: " << a << "\nb: " << b << "\na^b: " << c; |
| EXPECT_FALSE(isfinite(c.v[1])) |
| << "\na: " << a << "\nb: " << b << "\na^b: " << c; |
| } |
| } |
| |
| // pow(<0, b) is correct for integer b. |
| { |
| J a = MakeJet(-1.5, 3, 4); |
| |
| // b integer: |
| for (int i = -10; i <= 10; i++) { |
| J b = MakeJet(i, 0, 5); |
| J c = pow(a, b); |
| |
| EXPECT_TRUE(AreAlmostEqual(c.a, pow(-1.5, i), kTolerance)) |
| << "\na: " << a << "\nb: " << b << "\na^b: " << c; |
| EXPECT_TRUE(isfinite(c.v[0])) |
| << "\na: " << a << "\nb: " << b << "\na^b: " << c; |
| EXPECT_FALSE(isfinite(c.v[1])) |
| << "\na: " << a << "\nb: " << b << "\na^b: " << c; |
| EXPECT_TRUE( |
| AreAlmostEqual(c.v[0], i * pow(-1.5, i - 1) * 3.0, kTolerance)) |
| << "\na: " << a << "\nb: " << b << "\na^b: " << c; |
| } |
| } |
| |
| // pow(<0, b) is correct for noninteger b. |
| { |
| J a = MakeJet(-1.5, 3, 4); |
| J b = MakeJet(-2.5, 0, 5); |
| J c = pow(a, b); |
| EXPECT_FALSE(isfinite(c.a)) |
| << "\na: " << a << "\nb: " << b << "\na^b: " << c; |
| EXPECT_FALSE(isfinite(c.v[0])) |
| << "\na: " << a << "\nb: " << b << "\na^b: " << c; |
| EXPECT_FALSE(isfinite(c.v[1])) |
| << "\na: " << a << "\nb: " << b << "\na^b: " << c; |
| } |
| |
| // pow(0,y) == 0 for y == 2, with the second argument a Jet. |
| EXPECT_THAT(pow(0.0, MakeJet(2, 3, 4)), IsAlmostEqualTo(MakeJet(0, 0, 0))); |
| |
| // pow(<0,y) is correct for integer y. |
| { |
| double a = -1.5; |
| for (int i = -10; i <= 10; i++) { |
| J b = MakeJet(i, 3, 0); |
| J c = pow(a, b); |
| ExpectClose(c.a, pow(-1.5, i), kTolerance); |
| EXPECT_FALSE(isfinite(c.v[0])) |
| << "\na: " << a << "\nb: " << b << "\na^b: " << c; |
| EXPECT_TRUE(isfinite(c.v[1])) |
| << "\na: " << a << "\nb: " << b << "\na^b: " << c; |
| ExpectClose(c.v[1], 0, kTolerance); |
| } |
| } |
| |
| // pow(<0,y) is correct for noninteger y. |
| { |
| double a = -1.5; |
| J b = MakeJet(-3.14, 3, 0); |
| J c = pow(a, b); |
| EXPECT_FALSE(isfinite(c.a)) |
| << "\na: " << a << "\nb: " << b << "\na^b: " << c; |
| EXPECT_FALSE(isfinite(c.v[0])) |
| << "\na: " << a << "\nb: " << b << "\na^b: " << c; |
| EXPECT_FALSE(isfinite(c.v[1])) |
| << "\na: " << a << "\nb: " << b << "\na^b: " << c; |
| } |
| } |
| |
| TEST(Jet, Hypot2) { |
| // Resolve the ambiguity between two and three argument hypot overloads |
| using Hypot2 = J(const J&, const J&); |
| auto* const hypot2 = static_cast<Hypot2*>(&hypot<double, 2>); |
| |
| // clang-format off |
| NumericalTest2("hypot2", hypot2, 0.0, 1e-5); |
| NumericalTest2("hypot2", hypot2, -1e-5, 0.0); |
| NumericalTest2("hypot2", hypot2, 1e-5, 1e-5); |
| NumericalTest2("hypot2", hypot2, 0.0, 1.0); |
| NumericalTest2("hypot2", hypot2, 1e-3, 1.0); |
| NumericalTest2("hypot2", hypot2, 1e-3, -1.0); |
| NumericalTest2("hypot2", hypot2, -1e-3, 1.0); |
| NumericalTest2("hypot2", hypot2, -1e-3, -1.0); |
| NumericalTest2("hypot2", hypot2, 1.0, 2.0); |
| // clang-format on |
| |
| J zero = MakeJet(0.0, 2.0, 3.14); |
| EXPECT_THAT(hypot(x, y), IsAlmostEqualTo(sqrt(x * x + y * y))); |
| EXPECT_THAT(hypot(x, x), IsAlmostEqualTo(sqrt(2.0) * abs(x))); |
| |
| // The derivative is zero tangentially to the circle: |
| EXPECT_THAT(hypot(MakeJet(2.0, 1.0, 1.0), MakeJet(2.0, 1.0, -1.0)), |
| IsAlmostEqualTo(MakeJet(sqrt(8.0), std::sqrt(2.0), 0.0))); |
| |
| EXPECT_THAT(hypot(zero, x), IsAlmostEqualTo(x)); |
| EXPECT_THAT(hypot(y, zero), IsAlmostEqualTo(y)); |
| |
| // hypot(x, 0, 0) == x, even when x * x underflows: |
| EXPECT_EQ( |
| std::numeric_limits<double>::min() * std::numeric_limits<double>::min(), |
| 0.0); // Make sure it underflows |
| J tiny = MakeJet(std::numeric_limits<double>::min(), 2.0, 3.14); |
| EXPECT_THAT(hypot(tiny, J{0}), IsAlmostEqualTo(tiny)); |
| |
| // hypot(x, 0, 0) == x, even when x * x overflows: |
| EXPECT_EQ( |
| std::numeric_limits<double>::max() * std::numeric_limits<double>::max(), |
| std::numeric_limits<double>::infinity()); |
| J huge = MakeJet(std::numeric_limits<double>::max(), 2.0, 3.14); |
| EXPECT_THAT(hypot(huge, J{0}), IsAlmostEqualTo(huge)); |
| } |
| |
| TEST(Jet, Hypot3) { |
| J zero = MakeJet(0.0, 2.0, 3.14); |
| |
| // hypot(x, y, z) == sqrt(x^2 + y^2 + z^2) |
| EXPECT_THAT(hypot(x, y, z), IsAlmostEqualTo(sqrt(x * x + y * y + z * z))); |
| |
| // hypot(x, x) == sqrt(3) * abs(x) |
| EXPECT_THAT(hypot(x, x, x), IsAlmostEqualTo(sqrt(3.0) * abs(x))); |
| |
| // The derivative is zero tangentially to the circle: |
| EXPECT_THAT(hypot(MakeJet(2.0, 1.0, 1.0), |
| MakeJet(2.0, 1.0, -1.0), |
| MakeJet(2.0, -1.0, 0.0)), |
| IsAlmostEqualTo(MakeJet(sqrt(12.0), 1.0 / std::sqrt(3.0), 0.0))); |
| |
| EXPECT_THAT(hypot(x, zero, zero), IsAlmostEqualTo(x)); |
| EXPECT_THAT(hypot(zero, y, zero), IsAlmostEqualTo(y)); |
| EXPECT_THAT(hypot(zero, zero, z), IsAlmostEqualTo(z)); |
| EXPECT_THAT(hypot(x, y, z), IsAlmostEqualTo(hypot(hypot(x, y), z))); |
| EXPECT_THAT(hypot(x, y, z), IsAlmostEqualTo(hypot(x, hypot(y, z)))); |
| |
| // The following two tests are disabled because the three argument hypot is |
| // broken in the libc++ shipped with CLANG as of January 2022. |
| |
| #if !defined(_LIBCPP_VERSION) |
| // hypot(x, 0, 0) == x, even when x * x underflows: |
| EXPECT_EQ( |
| std::numeric_limits<double>::min() * std::numeric_limits<double>::min(), |
| 0.0); // Make sure it underflows |
| J tiny = MakeJet(std::numeric_limits<double>::min(), 2.0, 3.14); |
| EXPECT_THAT(hypot(tiny, J{0}, J{0}), IsAlmostEqualTo(tiny)); |
| |
| // hypot(x, 0, 0) == x, even when x * x overflows: |
| EXPECT_EQ( |
| std::numeric_limits<double>::max() * std::numeric_limits<double>::max(), |
| std::numeric_limits<double>::infinity()); |
| J huge = MakeJet(std::numeric_limits<double>::max(), 2.0, 3.14); |
| EXPECT_THAT(hypot(huge, J{0}, J{0}), IsAlmostEqualTo(huge)); |
| #endif |
| } |
| |
| #ifdef CERES_HAS_CPP20 |
| |
| TEST(Jet, Lerp) { |
| EXPECT_THAT(lerp(x, y, J{0}), IsAlmostEqualTo(x)); |
| EXPECT_THAT(lerp(x, y, J{1}), IsAlmostEqualTo(y)); |
| EXPECT_THAT(lerp(x, x, J{1}), IsAlmostEqualTo(x)); |
| EXPECT_THAT(lerp(y, y, J{0}), IsAlmostEqualTo(y)); |
| EXPECT_THAT(lerp(x, y, J{0.5}), IsAlmostEqualTo((x + y) / J{2.0})); |
| EXPECT_THAT(lerp(x, y, J{2}), IsAlmostEqualTo(J{2.0} * y - x)); |
| EXPECT_THAT(lerp(x, y, J{-2}), IsAlmostEqualTo(J{3.0} * x - J{2} * y)); |
| } |
| |
| TEST(Jet, Midpoint) { |
| EXPECT_THAT(midpoint(x, y), IsAlmostEqualTo((x + y) / J{2})); |
| EXPECT_THAT(midpoint(x, x), IsAlmostEqualTo(x)); |
| |
| { |
| // midpoint(x, y) = (x + y) / 2 while avoiding overflow |
| J x = MakeJet(std::numeric_limits<double>::min(), 1, 2); |
| J y = MakeJet(std::numeric_limits<double>::max(), 3, 4); |
| EXPECT_THAT(midpoint(x, y), IsAlmostEqualTo(x + (y - x) / J{2})); |
| } |
| |
| { |
| // midpoint(x, x) = x while avoiding overflow |
| J x = MakeJet(std::numeric_limits<double>::max(), |
| std::numeric_limits<double>::max(), |
| std::numeric_limits<double>::max()); |
| EXPECT_THAT(midpoint(x, x), IsAlmostEqualTo(x)); |
| } |
| |
| { // midpoint does not overflow for very large values |
| constexpr double a = 0.75 * std::numeric_limits<double>::max(); |
| J x = MakeJet(a, a, -a); |
| J y = MakeJet(a, a, a); |
| EXPECT_THAT(midpoint(x, y), IsAlmostEqualTo(MakeJet(a, a, 0))); |
| } |
| } |
| |
| #endif // defined(CERES_HAS_CPP20) |
| |
| TEST(Jet, Fma) { |
| J v = fma(x, y, z); |
| J w = x * y + z; |
| EXPECT_THAT(v, IsAlmostEqualTo(w)); |
| } |
| |
| TEST(Jet, FmaxJetWithJet) { |
| Fenv env; |
| // Clear all exceptions to ensure none are set by the following function |
| // calls. |
| std::feclearexcept(FE_ALL_EXCEPT); |
| |
| EXPECT_THAT(fmax(x, y), IsAlmostEqualTo(x)); |
| EXPECT_THAT(fmax(y, x), IsAlmostEqualTo(x)); |
| |
| // Average the Jets on equality (of scalar parts). |
| const J scalar_part_only_equal_to_x = J(x.a, 2 * x.v); |
| const J average = (x + scalar_part_only_equal_to_x) * 0.5; |
| EXPECT_THAT(fmax(x, scalar_part_only_equal_to_x), IsAlmostEqualTo(average)); |
| EXPECT_THAT(fmax(scalar_part_only_equal_to_x, x), IsAlmostEqualTo(average)); |
| |
| // Follow convention of fmax(): treat NANs as missing values. |
| const J nan_scalar_part(std::numeric_limits<double>::quiet_NaN(), 2 * x.v); |
| EXPECT_THAT(fmax(x, nan_scalar_part), IsAlmostEqualTo(x)); |
| EXPECT_THAT(fmax(nan_scalar_part, x), IsAlmostEqualTo(x)); |
| |
| #ifndef CERES_NO_FENV_ACCESS |
| EXPECT_EQ(std::fetestexcept(FE_ALL_EXCEPT & ~FE_INEXACT), 0); |
| #endif |
| } |
| |
| TEST(Jet, FmaxJetWithScalar) { |
| Fenv env; |
| // Clear all exceptions to ensure none are set by the following function |
| // calls. |
| std::feclearexcept(FE_ALL_EXCEPT); |
| |
| EXPECT_THAT(fmax(x, y.a), IsAlmostEqualTo(x)); |
| EXPECT_THAT(fmax(y.a, x), IsAlmostEqualTo(x)); |
| EXPECT_THAT(fmax(y, x.a), IsAlmostEqualTo(J{x.a})); |
| EXPECT_THAT(fmax(x.a, y), IsAlmostEqualTo(J{x.a})); |
| |
| // Average the Jet and scalar cast to a Jet on equality (of scalar parts). |
| const J average = (x + J{x.a}) * 0.5; |
| EXPECT_THAT(fmax(x, x.a), IsAlmostEqualTo(average)); |
| EXPECT_THAT(fmax(x.a, x), IsAlmostEqualTo(average)); |
| |
| // Follow convention of fmax(): treat NANs as missing values. |
| EXPECT_THAT(fmax(x, std::numeric_limits<double>::quiet_NaN()), |
| IsAlmostEqualTo(x)); |
| EXPECT_THAT(fmax(std::numeric_limits<double>::quiet_NaN(), x), |
| IsAlmostEqualTo(x)); |
| const J nan_scalar_part(std::numeric_limits<double>::quiet_NaN(), 2 * x.v); |
| EXPECT_THAT(fmax(nan_scalar_part, x.a), IsAlmostEqualTo(J{x.a})); |
| EXPECT_THAT(fmax(x.a, nan_scalar_part), IsAlmostEqualTo(J{x.a})); |
| |
| #ifndef CERES_NO_FENV_ACCESS |
| EXPECT_EQ(std::fetestexcept(FE_ALL_EXCEPT & ~FE_INEXACT), 0); |
| #endif |
| } |
| |
| TEST(Jet, FminJetWithJet) { |
| Fenv env; |
| // Clear all exceptions to ensure none are set by the following function |
| // calls. |
| std::feclearexcept(FE_ALL_EXCEPT); |
| |
| EXPECT_THAT(fmin(x, y), IsAlmostEqualTo(y)); |
| EXPECT_THAT(fmin(y, x), IsAlmostEqualTo(y)); |
| |
| // Average the Jets on equality (of scalar parts). |
| const J scalar_part_only_equal_to_x = J(x.a, 2 * x.v); |
| const J average = (x + scalar_part_only_equal_to_x) * 0.5; |
| EXPECT_THAT(fmin(x, scalar_part_only_equal_to_x), IsAlmostEqualTo(average)); |
| EXPECT_THAT(fmin(scalar_part_only_equal_to_x, x), IsAlmostEqualTo(average)); |
| |
| // Follow convention of fmin(): treat NANs as missing values. |
| const J nan_scalar_part(std::numeric_limits<double>::quiet_NaN(), 2 * x.v); |
| EXPECT_THAT(fmin(x, nan_scalar_part), IsAlmostEqualTo(x)); |
| EXPECT_THAT(fmin(nan_scalar_part, x), IsAlmostEqualTo(x)); |
| |
| #ifndef CERES_NO_FENV_ACCESS |
| EXPECT_EQ(std::fetestexcept(FE_ALL_EXCEPT & ~FE_INEXACT), 0); |
| #endif |
| } |
| |
| TEST(Jet, FminJetWithScalar) { |
| Fenv env; |
| // Clear all exceptions to ensure none are set by the following function |
| // calls. |
| std::feclearexcept(FE_ALL_EXCEPT); |
| |
| EXPECT_THAT(fmin(x, y.a), IsAlmostEqualTo(J{y.a})); |
| EXPECT_THAT(fmin(y.a, x), IsAlmostEqualTo(J{y.a})); |
| EXPECT_THAT(fmin(y, x.a), IsAlmostEqualTo(y)); |
| EXPECT_THAT(fmin(x.a, y), IsAlmostEqualTo(y)); |
| |
| // Average the Jet and scalar cast to a Jet on equality (of scalar parts). |
| const J average = (x + J{x.a}) * 0.5; |
| EXPECT_THAT(fmin(x, x.a), IsAlmostEqualTo(average)); |
| EXPECT_THAT(fmin(x.a, x), IsAlmostEqualTo(average)); |
| |
| // Follow convention of fmin(): treat NANs as missing values. |
| EXPECT_THAT(fmin(x, std::numeric_limits<double>::quiet_NaN()), |
| IsAlmostEqualTo(x)); |
| EXPECT_THAT(fmin(std::numeric_limits<double>::quiet_NaN(), x), |
| IsAlmostEqualTo(x)); |
| const J nan_scalar_part(std::numeric_limits<double>::quiet_NaN(), 2 * x.v); |
| EXPECT_THAT(fmin(nan_scalar_part, x.a), IsAlmostEqualTo(J{x.a})); |
| EXPECT_THAT(fmin(x.a, nan_scalar_part), IsAlmostEqualTo(J{x.a})); |
| |
| #ifndef CERES_NO_FENV_ACCESS |
| EXPECT_EQ(std::fetestexcept(FE_ALL_EXCEPT & ~FE_INEXACT), 0); |
| #endif |
| } |
| |
| TEST(Jet, Fdim) { |
| Fenv env; |
| // Clear all exceptions to ensure none are set by the following function |
| // calls. |
| std::feclearexcept(FE_ALL_EXCEPT); |
| |
| const J zero{}; |
| const J diff = x - y; |
| const J diffx = x - J{y.a}; |
| const J diffy = J{x.a} - y; |
| |
| EXPECT_THAT(fdim(x, y), IsAlmostEqualTo(diff)); |
| EXPECT_THAT(fdim(y, x), IsAlmostEqualTo(zero)); |
| EXPECT_THAT(fdim(x, y.a), IsAlmostEqualTo(diffx)); |
| EXPECT_THAT(fdim(y.a, x), IsAlmostEqualTo(J{zero.a})); |
| EXPECT_THAT(fdim(x.a, y), IsAlmostEqualTo(diffy)); |
| EXPECT_THAT(fdim(y, x.a), IsAlmostEqualTo(zero)); |
| EXPECT_TRUE(isnan(fdim(x, std::numeric_limits<J>::quiet_NaN()))); |
| EXPECT_TRUE(isnan(fdim(std::numeric_limits<J>::quiet_NaN(), x))); |
| EXPECT_TRUE(isnan(fdim(x, std::numeric_limits<double>::quiet_NaN()))); |
| EXPECT_TRUE(isnan(fdim(std::numeric_limits<double>::quiet_NaN(), x))); |
| |
| #ifndef CERES_NO_FENV_ACCESS |
| EXPECT_EQ(std::fetestexcept(FE_ALL_EXCEPT & ~FE_INEXACT), 0); |
| #endif |
| } |
| |
| TEST(Jet, CopySign) { |
| { // copysign(x, +1) |
| J z = copysign(x, J{+1}); |
| EXPECT_THAT(z, IsAlmostEqualTo(x)); |
| EXPECT_TRUE(isfinite(z.v[0])) << z; |
| EXPECT_TRUE(isfinite(z.v[1])) << z; |
| } |
| { // copysign(x, -1) |
| J z = copysign(x, J{-1}); |
| EXPECT_THAT(z, IsAlmostEqualTo(-x)); |
| EXPECT_TRUE(isfinite(z.v[0])) << z; |
| EXPECT_TRUE(isfinite(z.v[1])) << z; |
| } |
| { // copysign(-x, +1) |
| |
| J z = copysign(-x, J{+1}); |
| EXPECT_THAT(z, IsAlmostEqualTo(x)); |
| EXPECT_TRUE(isfinite(z.v[0])) << z; |
| EXPECT_TRUE(isfinite(z.v[1])) << z; |
| } |
| { // copysign(-x, -1) |
| J z = copysign(-x, J{-1}); |
| EXPECT_THAT(z, IsAlmostEqualTo(-x)); |
| EXPECT_TRUE(isfinite(z.v[0])) << z; |
| EXPECT_TRUE(isfinite(z.v[1])) << z; |
| } |
| { // copysign(-0, +1) |
| J z = copysign(MakeJet(-0, 1, 2), J{+1}); |
| EXPECT_THAT(z, IsAlmostEqualTo(MakeJet(+0, 1, 2))); |
| EXPECT_FALSE(std::signbit(z.a)) << z; |
| EXPECT_TRUE(isfinite(z.v[0])) << z; |
| EXPECT_TRUE(isfinite(z.v[1])) << z; |
| } |
| { // copysign(-0, -1) |
| J z = copysign(MakeJet(-0, 1, 2), J{-1}); |
| EXPECT_THAT(z, IsAlmostEqualTo(MakeJet(-0, -1, -2))); |
| EXPECT_TRUE(std::signbit(z.a)) << z; |
| EXPECT_TRUE(isfinite(z.v[0])) << z; |
| EXPECT_TRUE(isfinite(z.v[1])) << z; |
| } |
| { // copysign(+0, -1) |
| J z = copysign(MakeJet(+0, 1, 2), J{-1}); |
| EXPECT_THAT(z, IsAlmostEqualTo(MakeJet(-0, -1, -2))); |
| EXPECT_TRUE(std::signbit(z.a)) << z; |
| EXPECT_TRUE(isfinite(z.v[0])) << z; |
| EXPECT_TRUE(isfinite(z.v[1])) << z; |
| } |
| { // copysign(+0, +1) |
| J z = copysign(MakeJet(+0, 1, 2), J{+1}); |
| EXPECT_THAT(z, IsAlmostEqualTo(MakeJet(+0, 1, 2))); |
| EXPECT_FALSE(std::signbit(z.a)) << z; |
| EXPECT_TRUE(isfinite(z.v[0])) << z; |
| EXPECT_TRUE(isfinite(z.v[1])) << z; |
| } |
| { // copysign(+0, +0) |
| J z = copysign(MakeJet(+0, 1, 2), J{+0}); |
| EXPECT_FALSE(std::signbit(z.a)) << z; |
| EXPECT_TRUE(isnan(z.v[0])) << z; |
| EXPECT_TRUE(isnan(z.v[1])) << z; |
| } |
| { // copysign(+0, -0) |
| J z = copysign(MakeJet(+0, 1, 2), J{-0}); |
| EXPECT_FALSE(std::signbit(z.a)) << z; |
| EXPECT_TRUE(isnan(z.v[0])) << z; |
| EXPECT_TRUE(isnan(z.v[1])) << z; |
| } |
| { // copysign(-0, +0) |
| J z = copysign(MakeJet(-0, 1, 2), J{+0}); |
| EXPECT_FALSE(std::signbit(z.a)) << z; |
| EXPECT_TRUE(isnan(z.v[0])) << z; |
| EXPECT_TRUE(isnan(z.v[1])) << z; |
| } |
| { // copysign(-0, -0) |
| J z = copysign(MakeJet(-0, 1, 2), J{-0}); |
| EXPECT_FALSE(std::signbit(z.a)) << z; |
| EXPECT_TRUE(isnan(z.v[0])) << z; |
| EXPECT_TRUE(isnan(z.v[1])) << z; |
| } |
| { // copysign(1, -nan) |
| J z = copysign(MakeJet(1, 2, 3), |
| -J{std::numeric_limits<double>::quiet_NaN()}); |
| EXPECT_TRUE(std::signbit(z.a)) << z; |
| EXPECT_TRUE(std::signbit(z.v[0])) << z; |
| EXPECT_TRUE(std::signbit(z.v[1])) << z; |
| EXPECT_FALSE(isnan(z.v[0])) << z; |
| EXPECT_FALSE(isnan(z.v[1])) << z; |
| } |
| { // copysign(1, +nan) |
| J z = copysign(MakeJet(1, 2, 3), |
| +J{std::numeric_limits<double>::quiet_NaN()}); |
| EXPECT_FALSE(std::signbit(z.a)) << z; |
| EXPECT_FALSE(std::signbit(z.v[0])) << z; |
| EXPECT_FALSE(std::signbit(z.v[1])) << z; |
| EXPECT_FALSE(isnan(z.v[0])) << z; |
| EXPECT_FALSE(isnan(z.v[1])) << z; |
| } |
| } |
| |
| TEST(Jet, JetsInEigenMatrices) { |
| J x = MakeJet(2.3, -2.7, 1e-3); |
| J y = MakeJet(1.7, 0.5, 1e+2); |
| J z = MakeJet(5.3, -4.7, 1e-3); |
| J w = MakeJet(9.7, 1.5, 10.1); |
| |
| Eigen::Matrix<J, 2, 2> M; |
| Eigen::Matrix<J, 2, 1> v, r1, r2; |
| |
| M << x, y, z, w; |
| v << x, z; |
| |
| // M * v == (v^T * M^T)^T |
| r1 = M * v; |
| r2 = (v.transpose() * M.transpose()).transpose(); |
| |
| EXPECT_THAT(r1(0), IsAlmostEqualTo(r2(0))); |
| EXPECT_THAT(r1(1), IsAlmostEqualTo(r2(1))); |
| } |
| |
| TEST(Jet, ScalarComparison) { |
| Jet<double, 1> zero{0.0}; |
| zero.v << std::numeric_limits<double>::infinity(); |
| |
| Jet<double, 1> one{1.0}; |
| one.v << std::numeric_limits<double>::quiet_NaN(); |
| |
| Jet<double, 1> two{2.0}; |
| two.v << std::numeric_limits<double>::min() / 2; |
| |
| Jet<double, 1> three{3.0}; |
| |
| auto inf = std::numeric_limits<Jet<double, 1>>::infinity(); |
| auto nan = std::numeric_limits<Jet<double, 1>>::quiet_NaN(); |
| inf.v << 1.2; |
| nan.v << 3.4; |
| |
| std::feclearexcept(FE_ALL_EXCEPT); |
| |
| EXPECT_FALSE(islessgreater(zero, zero)); |
| EXPECT_FALSE(islessgreater(zero, zero.a)); |
| EXPECT_FALSE(islessgreater(zero.a, zero)); |
| |
| EXPECT_TRUE(isgreaterequal(three, three)); |
| EXPECT_TRUE(isgreaterequal(three, three.a)); |
| EXPECT_TRUE(isgreaterequal(three.a, three)); |
| |
| EXPECT_TRUE(isgreater(three, two)); |
| EXPECT_TRUE(isgreater(three, two.a)); |
| EXPECT_TRUE(isgreater(three.a, two)); |
| |
| EXPECT_TRUE(islessequal(one, one)); |
| EXPECT_TRUE(islessequal(one, one.a)); |
| EXPECT_TRUE(islessequal(one.a, one)); |
| |
| EXPECT_TRUE(isless(one, two)); |
| EXPECT_TRUE(isless(one, two.a)); |
| EXPECT_TRUE(isless(one.a, two)); |
| |
| EXPECT_FALSE(isunordered(inf, one)); |
| EXPECT_FALSE(isunordered(inf, one.a)); |
| EXPECT_FALSE(isunordered(inf.a, one)); |
| |
| EXPECT_TRUE(isunordered(nan, two)); |
| EXPECT_TRUE(isunordered(nan, two.a)); |
| EXPECT_TRUE(isunordered(nan.a, two)); |
| |
| EXPECT_TRUE(isunordered(inf, nan)); |
| EXPECT_TRUE(isunordered(inf, nan.a)); |
| EXPECT_TRUE(isunordered(inf.a, nan.a)); |
| |
| EXPECT_EQ(std::fetestexcept(FE_ALL_EXCEPT & ~FE_INEXACT), 0); |
| } |
| |
| TEST(Jet, Nested2XScalarComparison) { |
| Jet<J0d, 1> zero{J0d{0.0}}; |
| zero.v << std::numeric_limits<J0d>::infinity(); |
| |
| Jet<J0d, 1> one{J0d{1.0}}; |
| one.v << std::numeric_limits<J0d>::quiet_NaN(); |
| |
| Jet<J0d, 1> two{J0d{2.0}}; |
| two.v << std::numeric_limits<J0d>::min() / J0d{2}; |
| |
| Jet<J0d, 1> three{J0d{3.0}}; |
| |
| auto inf = std::numeric_limits<Jet<J0d, 1>>::infinity(); |
| auto nan = std::numeric_limits<Jet<J0d, 1>>::quiet_NaN(); |
| inf.v << J0d{1.2}; |
| nan.v << J0d{3.4}; |
| |
| std::feclearexcept(FE_ALL_EXCEPT); |
| |
| EXPECT_FALSE(islessgreater(zero, zero)); |
| EXPECT_FALSE(islessgreater(zero, zero.a)); |
| EXPECT_FALSE(islessgreater(zero.a, zero)); |
| EXPECT_FALSE(islessgreater(zero, zero.a.a)); |
| EXPECT_FALSE(islessgreater(zero.a.a, zero)); |
| |
| EXPECT_TRUE(isgreaterequal(three, three)); |
| EXPECT_TRUE(isgreaterequal(three, three.a)); |
| EXPECT_TRUE(isgreaterequal(three.a, three)); |
| EXPECT_TRUE(isgreaterequal(three, three.a.a)); |
| EXPECT_TRUE(isgreaterequal(three.a.a, three)); |
| |
| EXPECT_TRUE(isgreater(three, two)); |
| EXPECT_TRUE(isgreater(three, two.a)); |
| EXPECT_TRUE(isgreater(three.a, two)); |
| EXPECT_TRUE(isgreater(three, two.a.a)); |
| EXPECT_TRUE(isgreater(three.a.a, two)); |
| |
| EXPECT_TRUE(islessequal(one, one)); |
| EXPECT_TRUE(islessequal(one, one.a)); |
| EXPECT_TRUE(islessequal(one.a, one)); |
| EXPECT_TRUE(islessequal(one, one.a.a)); |
| EXPECT_TRUE(islessequal(one.a.a, one)); |
| |
| EXPECT_TRUE(isless(one, two)); |
| EXPECT_TRUE(isless(one, two.a)); |
| EXPECT_TRUE(isless(one.a, two)); |
| EXPECT_TRUE(isless(one, two.a.a)); |
| EXPECT_TRUE(isless(one.a.a, two)); |
| |
| EXPECT_FALSE(isunordered(inf, one)); |
| EXPECT_FALSE(isunordered(inf, one.a)); |
| EXPECT_FALSE(isunordered(inf.a, one)); |
| EXPECT_FALSE(isunordered(inf, one.a.a)); |
| EXPECT_FALSE(isunordered(inf.a.a, one)); |
| |
| EXPECT_TRUE(isunordered(nan, two)); |
| EXPECT_TRUE(isunordered(nan, two.a)); |
| EXPECT_TRUE(isunordered(nan.a, two)); |
| EXPECT_TRUE(isunordered(nan, two.a.a)); |
| EXPECT_TRUE(isunordered(nan.a.a, two)); |
| |
| EXPECT_TRUE(isunordered(inf, nan)); |
| EXPECT_TRUE(isunordered(inf, nan.a)); |
| EXPECT_TRUE(isunordered(inf.a, nan)); |
| EXPECT_TRUE(isunordered(inf, nan.a.a)); |
| EXPECT_TRUE(isunordered(inf.a.a, nan)); |
| |
| EXPECT_EQ(std::fetestexcept(FE_ALL_EXCEPT & ~FE_INEXACT), 0); |
| } |
| |
| TEST(JetTraitsTest, ClassificationNaN) { |
| Jet<double, 1> a(std::numeric_limits<double>::quiet_NaN()); |
| a.v << std::numeric_limits<double>::infinity(); |
| EXPECT_EQ(fpclassify(a), FP_NAN); |
| EXPECT_FALSE(isfinite(a)); |
| EXPECT_FALSE(isinf(a)); |
| EXPECT_FALSE(isnormal(a)); |
| EXPECT_FALSE(signbit(a)); |
| EXPECT_TRUE(isnan(a)); |
| } |
| |
| TEST(JetTraitsTest, ClassificationInf) { |
| Jet<double, 1> a(-std::numeric_limits<double>::infinity()); |
| a.v << std::numeric_limits<double>::quiet_NaN(); |
| EXPECT_EQ(fpclassify(a), FP_INFINITE); |
| EXPECT_FALSE(isfinite(a)); |
| EXPECT_FALSE(isnan(a)); |
| EXPECT_FALSE(isnormal(a)); |
| EXPECT_TRUE(signbit(a)); |
| EXPECT_TRUE(isinf(a)); |
| } |
| |
| TEST(JetTraitsTest, ClassificationFinite) { |
| Jet<double, 1> a(-5.5); |
| a.v << std::numeric_limits<double>::quiet_NaN(); |
| EXPECT_EQ(fpclassify(a), FP_NORMAL); |
| EXPECT_FALSE(isinf(a)); |
| EXPECT_FALSE(isnan(a)); |
| EXPECT_TRUE(signbit(a)); |
| EXPECT_TRUE(isfinite(a)); |
| EXPECT_TRUE(isnormal(a)); |
| } |
| |
| TEST(JetTraitsTest, ClassificationScalar) { |
| EXPECT_EQ(fpclassify(J0d{+0.0}), FP_ZERO); |
| EXPECT_EQ(fpclassify(J0d{-0.0}), FP_ZERO); |
| EXPECT_EQ(fpclassify(J0d{1.234}), FP_NORMAL); |
| EXPECT_EQ(fpclassify(J0d{std::numeric_limits<double>::min() / 2}), |
| FP_SUBNORMAL); |
| EXPECT_EQ(fpclassify(J0d{std::numeric_limits<double>::quiet_NaN()}), FP_NAN); |
| } |
| |
| TEST(JetTraitsTest, Nested2XClassificationScalar) { |
| EXPECT_EQ(fpclassify(J0<J0d>{J0d{+0.0}}), FP_ZERO); |
| EXPECT_EQ(fpclassify(J0<J0d>{J0d{-0.0}}), FP_ZERO); |
| EXPECT_EQ(fpclassify(J0<J0d>{J0d{1.234}}), FP_NORMAL); |
| EXPECT_EQ(fpclassify(J0<J0d>{J0d{std::numeric_limits<double>::min() / 2}}), |
| FP_SUBNORMAL); |
| EXPECT_EQ(fpclassify(J0<J0d>{J0d{std::numeric_limits<double>::quiet_NaN()}}), |
| FP_NAN); |
| } |
| |
| // The following test ensures that Jets have all the appropriate Eigen |
| // related traits so that they can be used as part of matrix |
| // decompositions. |
| TEST(Jet, FullRankEigenLLTSolve) { |
| Eigen::Matrix<J, 3, 3> A; |
| Eigen::Matrix<J, 3, 1> b, x; |
| for (int i = 0; i < 3; ++i) { |
| for (int j = 0; j < 3; ++j) { |
| A(i, j) = MakeJet(0.0, i, j * j); |
| } |
| b(i) = MakeJet(i, i, i); |
| x(i) = MakeJet(0.0, 0.0, 0.0); |
| A(i, i) = MakeJet(1.0, i, i * i); |
| } |
| x = A.llt().solve(b); |
| for (int i = 0; i < 3; ++i) { |
| EXPECT_EQ(x(i).a, b(i).a); |
| } |
| } |
| |
| TEST(Jet, FullRankEigenLDLTSolve) { |
| Eigen::Matrix<J, 3, 3> A; |
| Eigen::Matrix<J, 3, 1> b, x; |
| for (int i = 0; i < 3; ++i) { |
| for (int j = 0; j < 3; ++j) { |
| A(i, j) = MakeJet(0.0, i, j * j); |
| } |
| b(i) = MakeJet(i, i, i); |
| x(i) = MakeJet(0.0, 0.0, 0.0); |
| A(i, i) = MakeJet(1.0, i, i * i); |
| } |
| x = A.ldlt().solve(b); |
| for (int i = 0; i < 3; ++i) { |
| EXPECT_EQ(x(i).a, b(i).a); |
| } |
| } |
| |
| TEST(Jet, FullRankEigenLUSolve) { |
| Eigen::Matrix<J, 3, 3> A; |
| Eigen::Matrix<J, 3, 1> b, x; |
| for (int i = 0; i < 3; ++i) { |
| for (int j = 0; j < 3; ++j) { |
| A(i, j) = MakeJet(0.0, i, j * j); |
| } |
| b(i) = MakeJet(i, i, i); |
| x(i) = MakeJet(0.0, 0.0, 0.0); |
| A(i, i) = MakeJet(1.0, i, i * i); |
| } |
| |
| x = A.lu().solve(b); |
| for (int i = 0; i < 3; ++i) { |
| EXPECT_EQ(x(i).a, b(i).a); |
| } |
| } |
| |
| // ScalarBinaryOpTraits is only supported on Eigen versions >= 3.3 |
| TEST(JetTraitsTest, MatrixScalarUnaryOps) { |
| const J x = MakeJet(2.3, -2.7, 1e-3); |
| const J y = MakeJet(1.7, 0.5, 1e+2); |
| Eigen::Matrix<J, 2, 1> a; |
| a << x, y; |
| |
| const J sum = a.sum(); |
| const J sum2 = a(0) + a(1); |
| EXPECT_THAT(sum, IsAlmostEqualTo(sum2)); |
| } |
| |
| TEST(JetTraitsTest, MatrixScalarBinaryOps) { |
| const J x = MakeJet(2.3, -2.7, 1e-3); |
| const J y = MakeJet(1.7, 0.5, 1e+2); |
| const J z = MakeJet(5.3, -4.7, 1e-3); |
| const J w = MakeJet(9.7, 1.5, 10.1); |
| |
| Eigen::Matrix<J, 2, 2> M; |
| Eigen::Vector2d v; |
| |
| M << x, y, z, w; |
| v << 0.6, -2.1; |
| |
| // M * v == M * v.cast<J>(). |
| const Eigen::Matrix<J, 2, 1> r1 = M * v; |
| const Eigen::Matrix<J, 2, 1> r2 = M * v.cast<J>(); |
| |
| EXPECT_THAT(r1(0), IsAlmostEqualTo(r2(0))); |
| EXPECT_THAT(r1(1), IsAlmostEqualTo(r2(1))); |
| |
| // M * a == M * T(a). |
| const double a = 3.1; |
| const Eigen::Matrix<J, 2, 2> r3 = M * a; |
| const Eigen::Matrix<J, 2, 2> r4 = M * J(a); |
| |
| EXPECT_THAT(r3(0, 0), IsAlmostEqualTo(r4(0, 0))); |
| EXPECT_THAT(r3(0, 1), IsAlmostEqualTo(r4(0, 1))); |
| EXPECT_THAT(r3(1, 0), IsAlmostEqualTo(r4(1, 0))); |
| EXPECT_THAT(r3(1, 1), IsAlmostEqualTo(r4(1, 1))); |
| } |
| |
| TEST(JetTraitsTest, ArrayScalarUnaryOps) { |
| const J x = MakeJet(2.3, -2.7, 1e-3); |
| const J y = MakeJet(1.7, 0.5, 1e+2); |
| Eigen::Array<J, 2, 1> a; |
| a << x, y; |
| |
| const J sum = a.sum(); |
| const J sum2 = a(0) + a(1); |
| EXPECT_THAT(sum, sum2); |
| } |
| |
| TEST(JetTraitsTest, ArrayScalarBinaryOps) { |
| const J x = MakeJet(2.3, -2.7, 1e-3); |
| const J y = MakeJet(1.7, 0.5, 1e+2); |
| |
| Eigen::Array<J, 2, 1> a; |
| Eigen::Array2d b; |
| |
| a << x, y; |
| b << 0.6, -2.1; |
| |
| // a * b == a * b.cast<T>() |
| const Eigen::Array<J, 2, 1> r1 = a * b; |
| const Eigen::Array<J, 2, 1> r2 = a * b.cast<J>(); |
| |
| EXPECT_THAT(r1(0), r2(0)); |
| EXPECT_THAT(r1(1), r2(1)); |
| |
| // a * c == a * T(c). |
| const double c = 3.1; |
| const Eigen::Array<J, 2, 1> r3 = a * c; |
| const Eigen::Array<J, 2, 1> r4 = a * J(c); |
| |
| EXPECT_THAT(r3(0), r3(0)); |
| EXPECT_THAT(r4(1), r4(1)); |
| } |
| |
| TEST(Jet, Nested3X) { |
| using JJ = Jet<J, 2>; |
| using JJJ = Jet<JJ, 2>; |
| |
| JJJ x; |
| x.a = JJ(J(1, 0), 0); |
| x.v[0] = JJ(J(1)); |
| |
| JJJ y = x * x * x; |
| |
| ExpectClose(y.a.a.a, 1, kTolerance); |
| ExpectClose(y.v[0].a.a, 3., kTolerance); |
| ExpectClose(y.v[0].v[0].a, 6., kTolerance); |
| ExpectClose(y.v[0].v[0].v[0], 6., kTolerance); |
| |
| JJJ e = exp(x); |
| |
| ExpectClose(e.a.a.a, kE, kTolerance); |
| ExpectClose(e.v[0].a.a, kE, kTolerance); |
| ExpectClose(e.v[0].v[0].a, kE, kTolerance); |
| ExpectClose(e.v[0].v[0].v[0], kE, kTolerance); |
| } |
| |
| #if GTEST_HAS_TYPED_TEST |
| |
| using Types = testing::Types<std::int16_t, |
| std::uint16_t, |
| std::int32_t, |
| std::uint32_t, |
| std::int64_t, |
| std::uint64_t, |
| float, |
| double, |
| long double>; |
| |
| template <typename T> |
| class JetTest : public testing::Test {}; |
| |
| TYPED_TEST_SUITE(JetTest, Types); |
| |
| TYPED_TEST(JetTest, Comparison) { |
| using Scalar = TypeParam; |
| |
| EXPECT_EQ(J0<Scalar>{0}, J0<Scalar>{0}); |
| EXPECT_GE(J0<Scalar>{3}, J0<Scalar>{3}); |
| EXPECT_GT(J0<Scalar>{3}, J0<Scalar>{2}); |
| EXPECT_LE(J0<Scalar>{1}, J0<Scalar>{1}); |
| EXPECT_LT(J0<Scalar>{1}, J0<Scalar>{2}); |
| EXPECT_NE(J0<Scalar>{1}, J0<Scalar>{2}); |
| } |
| |
| TYPED_TEST(JetTest, ScalarComparison) { |
| using Scalar = TypeParam; |
| |
| EXPECT_EQ(J0d{0.0}, Scalar{0}); |
| EXPECT_GE(J0d{3.0}, Scalar{3}); |
| EXPECT_GT(J0d{3.0}, Scalar{2}); |
| EXPECT_LE(J0d{1.0}, Scalar{1}); |
| EXPECT_LT(J0d{1.0}, Scalar{2}); |
| EXPECT_NE(J0d{1.0}, Scalar{2}); |
| |
| EXPECT_EQ(Scalar{0}, J0d{0.0}); |
| EXPECT_GE(Scalar{1}, J0d{1.0}); |
| EXPECT_GT(Scalar{2}, J0d{1.0}); |
| EXPECT_LE(Scalar{3}, J0d{3.0}); |
| EXPECT_LT(Scalar{2}, J0d{3.0}); |
| EXPECT_NE(Scalar{2}, J0d{1.0}); |
| } |
| |
| TYPED_TEST(JetTest, Nested2XComparison) { |
| using Scalar = TypeParam; |
| |
| EXPECT_EQ(J0<J0d>{J0d{0.0}}, Scalar{0}); |
| EXPECT_GE(J0<J0d>{J0d{3.0}}, Scalar{3}); |
| EXPECT_GT(J0<J0d>{J0d{3.0}}, Scalar{2}); |
| EXPECT_LE(J0<J0d>{J0d{1.0}}, Scalar{1}); |
| EXPECT_LT(J0<J0d>{J0d{1.0}}, Scalar{2}); |
| EXPECT_NE(J0<J0d>{J0d{1.0}}, Scalar{2}); |
| |
| EXPECT_EQ(Scalar{0}, J0<J0d>{J0d{0.0}}); |
| EXPECT_GE(Scalar{1}, J0<J0d>{J0d{1.0}}); |
| EXPECT_GT(Scalar{2}, J0<J0d>{J0d{1.0}}); |
| EXPECT_LE(Scalar{3}, J0<J0d>{J0d{3.0}}); |
| EXPECT_LT(Scalar{2}, J0<J0d>{J0d{3.0}}); |
| EXPECT_NE(Scalar{2}, J0<J0d>{J0d{1.0}}); |
| } |
| |
| TYPED_TEST(JetTest, Nested3XComparison) { |
| using Scalar = TypeParam; |
| |
| EXPECT_EQ(J0<J0<J0d>>{J0<J0d>{J0d{0.0}}}, Scalar{0}); |
| EXPECT_GE(J0<J0<J0d>>{J0<J0d>{J0d{3.0}}}, Scalar{3}); |
| EXPECT_GT(J0<J0<J0d>>{J0<J0d>{J0d{3.0}}}, Scalar{2}); |
| EXPECT_LE(J0<J0<J0d>>{J0<J0d>{J0d{1.0}}}, Scalar{1}); |
| EXPECT_LT(J0<J0<J0d>>{J0<J0d>{J0d{1.0}}}, Scalar{2}); |
| EXPECT_NE(J0<J0<J0d>>{J0<J0d>{J0d{1.0}}}, Scalar{2}); |
| |
| EXPECT_EQ(Scalar{0}, J0<J0<J0d>>{J0<J0d>{J0d{0.0}}}); |
| EXPECT_GE(Scalar{1}, J0<J0<J0d>>{J0<J0d>{J0d{1.0}}}); |
| EXPECT_GT(Scalar{2}, J0<J0<J0d>>{J0<J0d>{J0d{1.0}}}); |
| EXPECT_LE(Scalar{3}, J0<J0<J0d>>{J0<J0d>{J0d{3.0}}}); |
| EXPECT_LT(Scalar{2}, J0<J0<J0d>>{J0<J0d>{J0d{3.0}}}); |
| EXPECT_NE(Scalar{2}, J0<J0<J0d>>{J0<J0d>{J0d{1.0}}}); |
| } |
| |
| #endif // GTEST_HAS_TYPED_TEST |
| |
| } // namespace ceres::internal |
| |
| #ifdef _MSC_VER |
| #pragma float_control(pop) |
| #endif |