blob: 728c9c2e2477a63d60d6a63db0835d2a91909d6e [file] [log] [blame]
// Ceres Solver - A fast non-linear least squares minimizer
// Copyright 2015 Google Inc. All rights reserved.
// http://ceres-solver.org/
//
// Redistribution and use in source and binary forms, with or without
// modification, are permitted provided that the following conditions are met:
//
// * Redistributions of source code must retain the above copyright notice,
// this list of conditions and the following disclaimer.
// * Redistributions in binary form must reproduce the above copyright notice,
// this list of conditions and the following disclaimer in the documentation
// and/or other materials provided with the distribution.
// * Neither the name of Google Inc. nor the names of its contributors may be
// used to endorse or promote products derived from this software without
// specific prior written permission.
//
// THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
// AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
// IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
// ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE
// LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
// CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
// SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
// INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
// CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
// ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
// POSSIBILITY OF SUCH DAMAGE.
//
// Author: joydeepb@ri.cmu.edu (Joydeep Biswas)
//
// This example demonstrates how to use the DynamicAutoDiffCostFunction
// variant of CostFunction. The DynamicAutoDiffCostFunction is meant to
// be used in cases where the number of parameter blocks or the sizes are not
// known at compile time.
//
// This example simulates a robot traversing down a 1-dimension hallway with
// noise odometry readings and noisy range readings of the end of the hallway.
// By fusing the noisy odometry and sensor readings this example demonstrates
// how to compute the maximum likelihood estimate (MLE) of the robot's pose at
// each timestep.
//
// The robot starts at the origin, and it is travels to the end of a corridor of
// fixed length specified by the "--corridor_length" flag. It executes a series
// of motion commands to move forward a fixed length, specified by the
// "--pose_separation" flag, at which pose it receives relative odometry
// measurements as well as a range reading of the distance to the end of the
// hallway. The odometry readings are drawn with Gaussian noise and standard
// deviation specified by the "--odometry_stddev" flag, and the range readings
// similarly with standard deviation specified by the "--range-stddev" flag.
//
// There are two types of residuals in this problem:
// 1) The OdometryConstraint residual, that accounts for the odometry readings
// between successive pose estimates of the robot.
// 2) The RangeConstraint residual, that accounts for the errors in the observed
// range readings from each pose.
//
// The OdometryConstraint residual is modeled as an AutoDiffCostFunction with
// a fixed parameter block size of 1, which is the relative odometry being
// solved for, between a pair of successive poses of the robot. Differences
// between observed and computed relative odometry values are penalized weighted
// by the known standard deviation of the odometry readings.
//
// The RangeConstraint residual is modeled as a DynamicAutoDiffCostFunction
// which sums up the relative odometry estimates to compute the estimated
// global pose of the robot, and then computes the expected range reading.
// Differences between the observed and expected range readings are then
// penalized weighted by the standard deviation of readings of the sensor.
// Since the number of poses of the robot is not known at compile time, this
// cost function is implemented as a DynamicAutoDiffCostFunction.
//
// The outputs of the example are the initial values of the odometry and range
// readings, and the range and odometry errors for every pose of the robot.
// After computing the MLE, the computed poses and corrected odometry values
// are printed out, along with the corresponding range and odometry errors. Note
// that as an MLE of a noisy system the errors will not be reduced to zero, but
// the odometry estimates will be updated to maximize the joint likelihood of
// all odometry and range readings of the robot.
//
// Mathematical Formulation
// ======================================================
//
// Let p_0, .., p_N be (N+1) robot poses, where the robot moves down the
// corridor starting from p_0 and ending at p_N. We assume that p_0 is the
// origin of the coordinate system.
// Odometry u_i is the observed relative odometry between pose p_(i-1) and p_i,
// and range reading y_i is the range reading of the end of the corridor from
// pose p_i. Both odometry as well as range readings are noisy, but we wish to
// compute the maximum likelihood estimate (MLE) of corrected odometry values
// u*_0 to u*_(N-1), such that the Belief is optimized:
//
// Belief(u*_(0:N-1) | u_(0:N-1), y_(0:N-1)) 1.
// = P(u*_(0:N-1) | u_(0:N-1), y_(0:N-1)) 2.
// \propto P(y_(0:N-1) | u*_(0:N-1), u_(0:N-1)) P(u*_(0:N-1) | u_(0:N-1)) 3.
// = \prod_i{ P(y_i | u*_(0:i)) P(u*_i | u_i) } 4.
//
// Here, the subscript "(0:i)" is used as shorthand to indicate entries from all
// timesteps 0 to i for that variable, both inclusive.
//
// Bayes' rule is used to derive eq. 3 from 2, and the independence of
// odometry observations and range readings is exploited to derive 4 from 3.
//
// Thus, the Belief, up to scale, is factored as a product of a number of
// terms, two for each pose, where for each pose term there is one term for the
// range reading, P(y_i | u*_(0:i) and one term for the odometry reading,
// P(u*_i | u_i) . Note that the term for the range reading is dependent on all
// odometry values u*_(0:i), while the odometry term, P(u*_i | u_i) depends only
// on a single value, u_i. Both the range reading as well as odometry
// probability terms are modeled as the Normal distribution, and have the form:
//
// p(x) \propto \exp{-((x - x_mean) / x_stddev)^2}
//
// where x refers to either the MLE odometry u* or range reading y, and x_mean
// is the corresponding mean value, u for the odometry terms, and y_expected,
// the expected range reading based on all the previous odometry terms.
// The MLE is thus found by finding those values x* which minimize:
//
// x* = \arg\min{((x - x_mean) / x_stddev)^2}
//
// which is in the nonlinear least-square form, suited to being solved by Ceres.
// The non-linear component arise from the computation of x_mean. The residuals
// ((x - x_mean) / x_stddev) for the residuals that Ceres will optimize. As
// mentioned earlier, the odometry term for each pose depends only on one
// variable, and will be computed by an AutoDiffCostFunction, while the term
// for the range reading will depend on all previous odometry observations, and
// will be computed by a DynamicAutoDiffCostFunction since the number of
// odometry observations will only be known at run time.
#include <algorithm>
#include <cmath>
#include <cstdio>
#include <random>
#include <vector>
#include "ceres/ceres.h"
#include "ceres/dynamic_autodiff_cost_function.h"
#include "gflags/gflags.h"
#include "glog/logging.h"
using ceres::AutoDiffCostFunction;
using ceres::CauchyLoss;
using ceres::CostFunction;
using ceres::DynamicAutoDiffCostFunction;
using ceres::LossFunction;
using ceres::Problem;
using ceres::Solve;
using ceres::Solver;
DEFINE_double(corridor_length,
30.0,
"Length of the corridor that the robot is travelling down.");
DEFINE_double(pose_separation,
0.5,
"The distance that the robot traverses between successive "
"odometry updates.");
DEFINE_double(odometry_stddev,
0.1,
"The standard deviation of odometry error of the robot.");
DEFINE_double(range_stddev,
0.01,
"The standard deviation of range readings of the robot.");
// The stride length of the dynamic_autodiff_cost_function evaluator.
static constexpr int kStride = 10;
struct OdometryConstraint {
using OdometryCostFunction = AutoDiffCostFunction<OdometryConstraint, 1, 1>;
OdometryConstraint(double odometry_mean, double odometry_stddev)
: odometry_mean(odometry_mean), odometry_stddev(odometry_stddev) {}
template <typename T>
bool operator()(const T* const odometry, T* residual) const {
*residual = (*odometry - odometry_mean) / odometry_stddev;
return true;
}
static OdometryCostFunction* Create(const double odometry_value) {
return new OdometryCostFunction(new OdometryConstraint(
odometry_value, CERES_GET_FLAG(FLAGS_odometry_stddev)));
}
const double odometry_mean;
const double odometry_stddev;
};
struct RangeConstraint {
using RangeCostFunction =
DynamicAutoDiffCostFunction<RangeConstraint, kStride>;
RangeConstraint(int pose_index,
double range_reading,
double range_stddev,
double corridor_length)
: pose_index(pose_index),
range_reading(range_reading),
range_stddev(range_stddev),
corridor_length(corridor_length) {}
template <typename T>
bool operator()(T const* const* relative_poses, T* residuals) const {
T global_pose(0);
for (int i = 0; i <= pose_index; ++i) {
global_pose += relative_poses[i][0];
}
residuals[0] =
(global_pose + range_reading - corridor_length) / range_stddev;
return true;
}
// Factory method to create a CostFunction from a RangeConstraint to
// conveniently add to a ceres problem.
static RangeCostFunction* Create(const int pose_index,
const double range_reading,
std::vector<double>* odometry_values,
std::vector<double*>* parameter_blocks) {
auto* constraint =
new RangeConstraint(pose_index,
range_reading,
CERES_GET_FLAG(FLAGS_range_stddev),
CERES_GET_FLAG(FLAGS_corridor_length));
auto* cost_function = new RangeCostFunction(constraint);
// Add all the parameter blocks that affect this constraint.
parameter_blocks->clear();
for (int i = 0; i <= pose_index; ++i) {
parameter_blocks->push_back(&((*odometry_values)[i]));
cost_function->AddParameterBlock(1);
}
cost_function->SetNumResiduals(1);
return (cost_function);
}
const int pose_index;
const double range_reading;
const double range_stddev;
const double corridor_length;
};
namespace {
void SimulateRobot(std::vector<double>* odometry_values,
std::vector<double>* range_readings) {
const int num_steps =
static_cast<int>(ceil(CERES_GET_FLAG(FLAGS_corridor_length) /
CERES_GET_FLAG(FLAGS_pose_separation)));
std::mt19937 prng;
std::normal_distribution<double> odometry_noise(
0.0, CERES_GET_FLAG(FLAGS_odometry_stddev));
std::normal_distribution<double> range_noise(
0.0, CERES_GET_FLAG(FLAGS_range_stddev));
// The robot starts out at the origin.
double robot_location = 0.0;
for (int i = 0; i < num_steps; ++i) {
const double actual_odometry_value =
std::min(CERES_GET_FLAG(FLAGS_pose_separation),
CERES_GET_FLAG(FLAGS_corridor_length) - robot_location);
robot_location += actual_odometry_value;
const double actual_range =
CERES_GET_FLAG(FLAGS_corridor_length) - robot_location;
const double observed_odometry =
actual_odometry_value + odometry_noise(prng);
const double observed_range = actual_range + range_noise(prng);
odometry_values->push_back(observed_odometry);
range_readings->push_back(observed_range);
}
}
void PrintState(const std::vector<double>& odometry_readings,
const std::vector<double>& range_readings) {
CHECK_EQ(odometry_readings.size(), range_readings.size());
double robot_location = 0.0;
printf("pose: location odom range r.error o.error\n");
for (int i = 0; i < odometry_readings.size(); ++i) {
robot_location += odometry_readings[i];
const double range_error = robot_location + range_readings[i] -
CERES_GET_FLAG(FLAGS_corridor_length);
const double odometry_error =
CERES_GET_FLAG(FLAGS_pose_separation) - odometry_readings[i];
printf("%4d: %8.3f %8.3f %8.3f %8.3f %8.3f\n",
static_cast<int>(i),
robot_location,
odometry_readings[i],
range_readings[i],
range_error,
odometry_error);
}
}
} // namespace
int main(int argc, char** argv) {
google::InitGoogleLogging(argv[0]);
GFLAGS_NAMESPACE::ParseCommandLineFlags(&argc, &argv, true);
// Make sure that the arguments parsed are all positive.
CHECK_GT(CERES_GET_FLAG(FLAGS_corridor_length), 0.0);
CHECK_GT(CERES_GET_FLAG(FLAGS_pose_separation), 0.0);
CHECK_GT(CERES_GET_FLAG(FLAGS_odometry_stddev), 0.0);
CHECK_GT(CERES_GET_FLAG(FLAGS_range_stddev), 0.0);
std::vector<double> odometry_values;
std::vector<double> range_readings;
SimulateRobot(&odometry_values, &range_readings);
printf("Initial values:\n");
PrintState(odometry_values, range_readings);
ceres::Problem problem;
for (int i = 0; i < odometry_values.size(); ++i) {
// Create and add a DynamicAutoDiffCostFunction for the RangeConstraint from
// pose i.
std::vector<double*> parameter_blocks;
RangeConstraint::RangeCostFunction* range_cost_function =
RangeConstraint::Create(
i, range_readings[i], &odometry_values, &parameter_blocks);
problem.AddResidualBlock(range_cost_function, nullptr, parameter_blocks);
// Create and add an AutoDiffCostFunction for the OdometryConstraint for
// pose i.
problem.AddResidualBlock(OdometryConstraint::Create(odometry_values[i]),
nullptr,
&(odometry_values[i]));
}
ceres::Solver::Options solver_options;
solver_options.minimizer_progress_to_stdout = true;
Solver::Summary summary;
printf("Solving...\n");
Solve(solver_options, &problem, &summary);
printf("Done.\n");
std::cout << summary.FullReport() << "\n";
printf("Final values:\n");
PrintState(odometry_values, range_readings);
return 0;
}