| // Ceres Solver - A fast non-linear least squares minimizer | |
| // Copyright 2015 Google Inc. All rights reserved. | |
| // http://ceres-solver.org/ | |
| // | |
| // Redistribution and use in source and binary forms, with or without | |
| // modification, are permitted provided that the following conditions are met: | |
| // | |
| // * Redistributions of source code must retain the above copyright notice, | |
| // this list of conditions and the following disclaimer. | |
| // * Redistributions in binary form must reproduce the above copyright notice, | |
| // this list of conditions and the following disclaimer in the documentation | |
| // and/or other materials provided with the distribution. | |
| // * Neither the name of Google Inc. nor the names of its contributors may be | |
| // used to endorse or promote products derived from this software without | |
| // specific prior written permission. | |
| // | |
| // THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" | |
| // AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE | |
| // IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE | |
| // ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE | |
| // LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR | |
| // CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF | |
| // SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS | |
| // INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN | |
| // CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) | |
| // ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE | |
| // POSSIBILITY OF SUCH DAMAGE. | |
| // | |
| // Author: sameeragarwal@google.com (Sameer Agarwal) | |
| // | |
| // TODO(sameeragarwal): row_block_counter can perhaps be replaced by | |
| // Chunk::start ? | |
| #ifndef CERES_INTERNAL_SCHUR_ELIMINATOR_IMPL_H_ | |
| #define CERES_INTERNAL_SCHUR_ELIMINATOR_IMPL_H_ | |
| // Eigen has an internal threshold switching between different matrix | |
| // multiplication algorithms. In particular for matrices larger than | |
| // EIGEN_CACHEFRIENDLY_PRODUCT_THRESHOLD it uses a cache friendly | |
| // matrix matrix product algorithm that has a higher setup cost. For | |
| // matrix sizes close to this threshold, especially when the matrices | |
| // are thin and long, the default choice may not be optimal. This is | |
| // the case for us, as the default choice causes a 30% performance | |
| // regression when we moved from Eigen2 to Eigen3. | |
| #define EIGEN_CACHEFRIENDLY_PRODUCT_THRESHOLD 10 | |
| // This include must come before any #ifndef check on Ceres compile options. | |
| #include "ceres/internal/port.h" | |
| #ifdef CERES_USE_OPENMP | |
| #include <omp.h> | |
| #endif | |
| #include <algorithm> | |
| #include <map> | |
| #include "ceres/block_random_access_matrix.h" | |
| #include "ceres/block_sparse_matrix.h" | |
| #include "ceres/block_structure.h" | |
| #include "ceres/internal/eigen.h" | |
| #include "ceres/internal/fixed_array.h" | |
| #include "ceres/internal/scoped_ptr.h" | |
| #include "ceres/map_util.h" | |
| #include "ceres/schur_eliminator.h" | |
| #include "ceres/small_blas.h" | |
| #include "ceres/stl_util.h" | |
| #include "Eigen/Dense" | |
| #include "glog/logging.h" | |
| namespace ceres { | |
| namespace internal { | |
| template <int kRowBlockSize, int kEBlockSize, int kFBlockSize> | |
| SchurEliminator<kRowBlockSize, kEBlockSize, kFBlockSize>::~SchurEliminator() { | |
| STLDeleteElements(&rhs_locks_); | |
| } | |
| template <int kRowBlockSize, int kEBlockSize, int kFBlockSize> | |
| void | |
| SchurEliminator<kRowBlockSize, kEBlockSize, kFBlockSize>:: | |
| Init(int num_eliminate_blocks, const CompressedRowBlockStructure* bs) { | |
| CHECK_GT(num_eliminate_blocks, 0) | |
| << "SchurComplementSolver cannot be initialized with " | |
| << "num_eliminate_blocks = 0."; | |
| num_eliminate_blocks_ = num_eliminate_blocks; | |
| const int num_col_blocks = bs->cols.size(); | |
| const int num_row_blocks = bs->rows.size(); | |
| buffer_size_ = 1; | |
| chunks_.clear(); | |
| lhs_row_layout_.clear(); | |
| int lhs_num_rows = 0; | |
| // Add a map object for each block in the reduced linear system | |
| // and build the row/column block structure of the reduced linear | |
| // system. | |
| lhs_row_layout_.resize(num_col_blocks - num_eliminate_blocks_); | |
| for (int i = num_eliminate_blocks_; i < num_col_blocks; ++i) { | |
| lhs_row_layout_[i - num_eliminate_blocks_] = lhs_num_rows; | |
| lhs_num_rows += bs->cols[i].size; | |
| } | |
| int r = 0; | |
| // Iterate over the row blocks of A, and detect the chunks. The | |
| // matrix should already have been ordered so that all rows | |
| // containing the same y block are vertically contiguous. Along | |
| // the way also compute the amount of space each chunk will need | |
| // to perform the elimination. | |
| while (r < num_row_blocks) { | |
| const int chunk_block_id = bs->rows[r].cells.front().block_id; | |
| if (chunk_block_id >= num_eliminate_blocks_) { | |
| break; | |
| } | |
| chunks_.push_back(Chunk()); | |
| Chunk& chunk = chunks_.back(); | |
| chunk.size = 0; | |
| chunk.start = r; | |
| int buffer_size = 0; | |
| const int e_block_size = bs->cols[chunk_block_id].size; | |
| // Add to the chunk until the first block in the row is | |
| // different than the one in the first row for the chunk. | |
| while (r + chunk.size < num_row_blocks) { | |
| const CompressedRow& row = bs->rows[r + chunk.size]; | |
| if (row.cells.front().block_id != chunk_block_id) { | |
| break; | |
| } | |
| // Iterate over the blocks in the row, ignoring the first | |
| // block since it is the one to be eliminated. | |
| for (int c = 1; c < row.cells.size(); ++c) { | |
| const Cell& cell = row.cells[c]; | |
| if (InsertIfNotPresent( | |
| &(chunk.buffer_layout), cell.block_id, buffer_size)) { | |
| buffer_size += e_block_size * bs->cols[cell.block_id].size; | |
| } | |
| } | |
| buffer_size_ = std::max(buffer_size, buffer_size_); | |
| ++chunk.size; | |
| } | |
| CHECK_GT(chunk.size, 0); | |
| r += chunk.size; | |
| } | |
| const Chunk& chunk = chunks_.back(); | |
| uneliminated_row_begins_ = chunk.start + chunk.size; | |
| if (num_threads_ > 1) { | |
| random_shuffle(chunks_.begin(), chunks_.end()); | |
| } | |
| buffer_.reset(new double[buffer_size_ * num_threads_]); | |
| // chunk_outer_product_buffer_ only needs to store e_block_size * | |
| // f_block_size, which is always less than buffer_size_, so we just | |
| // allocate buffer_size_ per thread. | |
| chunk_outer_product_buffer_.reset(new double[buffer_size_ * num_threads_]); | |
| STLDeleteElements(&rhs_locks_); | |
| rhs_locks_.resize(num_col_blocks - num_eliminate_blocks_); | |
| for (int i = 0; i < num_col_blocks - num_eliminate_blocks_; ++i) { | |
| rhs_locks_[i] = new Mutex; | |
| } | |
| } | |
| template <int kRowBlockSize, int kEBlockSize, int kFBlockSize> | |
| void | |
| SchurEliminator<kRowBlockSize, kEBlockSize, kFBlockSize>:: | |
| Eliminate(const BlockSparseMatrix* A, | |
| const double* b, | |
| const double* D, | |
| BlockRandomAccessMatrix* lhs, | |
| double* rhs) { | |
| if (lhs->num_rows() > 0) { | |
| lhs->SetZero(); | |
| VectorRef(rhs, lhs->num_rows()).setZero(); | |
| } | |
| const CompressedRowBlockStructure* bs = A->block_structure(); | |
| const int num_col_blocks = bs->cols.size(); | |
| // Add the diagonal to the schur complement. | |
| if (D != NULL) { | |
| #pragma omp parallel for num_threads(num_threads_) schedule(dynamic) | |
| for (int i = num_eliminate_blocks_; i < num_col_blocks; ++i) { | |
| const int block_id = i - num_eliminate_blocks_; | |
| int r, c, row_stride, col_stride; | |
| CellInfo* cell_info = lhs->GetCell(block_id, block_id, | |
| &r, &c, | |
| &row_stride, &col_stride); | |
| if (cell_info != NULL) { | |
| const int block_size = bs->cols[i].size; | |
| typename EigenTypes<Eigen::Dynamic>::ConstVectorRef | |
| diag(D + bs->cols[i].position, block_size); | |
| CeresMutexLock l(&cell_info->m); | |
| MatrixRef m(cell_info->values, row_stride, col_stride); | |
| m.block(r, c, block_size, block_size).diagonal() | |
| += diag.array().square().matrix(); | |
| } | |
| } | |
| } | |
| // Eliminate y blocks one chunk at a time. For each chunk, compute | |
| // the entries of the normal equations and the gradient vector block | |
| // corresponding to the y block and then apply Gaussian elimination | |
| // to them. The matrix ete stores the normal matrix corresponding to | |
| // the block being eliminated and array buffer_ contains the | |
| // non-zero blocks in the row corresponding to this y block in the | |
| // normal equations. This computation is done in | |
| // ChunkDiagonalBlockAndGradient. UpdateRhs then applies gaussian | |
| // elimination to the rhs of the normal equations, updating the rhs | |
| // of the reduced linear system by modifying rhs blocks for all the | |
| // z blocks that share a row block/residual term with the y | |
| // block. EliminateRowOuterProduct does the corresponding operation | |
| // for the lhs of the reduced linear system. | |
| #pragma omp parallel for num_threads(num_threads_) schedule(dynamic) | |
| for (int i = 0; i < chunks_.size(); ++i) { | |
| #ifdef CERES_USE_OPENMP | |
| int thread_id = omp_get_thread_num(); | |
| #else | |
| int thread_id = 0; | |
| #endif | |
| double* buffer = buffer_.get() + thread_id * buffer_size_; | |
| const Chunk& chunk = chunks_[i]; | |
| const int e_block_id = bs->rows[chunk.start].cells.front().block_id; | |
| const int e_block_size = bs->cols[e_block_id].size; | |
| VectorRef(buffer, buffer_size_).setZero(); | |
| typename EigenTypes<kEBlockSize, kEBlockSize>::Matrix | |
| ete(e_block_size, e_block_size); | |
| if (D != NULL) { | |
| const typename EigenTypes<kEBlockSize>::ConstVectorRef | |
| diag(D + bs->cols[e_block_id].position, e_block_size); | |
| ete = diag.array().square().matrix().asDiagonal(); | |
| } else { | |
| ete.setZero(); | |
| } | |
| FixedArray<double, 8> g(e_block_size); | |
| typename EigenTypes<kEBlockSize>::VectorRef gref(g.get(), e_block_size); | |
| gref.setZero(); | |
| // We are going to be computing | |
| // | |
| // S += F'F - F'E(E'E)^{-1}E'F | |
| // | |
| // for each Chunk. The computation is broken down into a number of | |
| // function calls as below. | |
| // Compute the outer product of the e_blocks with themselves (ete | |
| // = E'E). Compute the product of the e_blocks with the | |
| // corresonding f_blocks (buffer = E'F), the gradient of the terms | |
| // in this chunk (g) and add the outer product of the f_blocks to | |
| // Schur complement (S += F'F). | |
| ChunkDiagonalBlockAndGradient( | |
| chunk, A, b, chunk.start, &ete, g.get(), buffer, lhs); | |
| // Normally one wouldn't compute the inverse explicitly, but | |
| // e_block_size will typically be a small number like 3, in | |
| // which case its much faster to compute the inverse once and | |
| // use it to multiply other matrices/vectors instead of doing a | |
| // Solve call over and over again. | |
| typename EigenTypes<kEBlockSize, kEBlockSize>::Matrix inverse_ete = | |
| ete | |
| .template selfadjointView<Eigen::Upper>() | |
| .llt() | |
| .solve(Matrix::Identity(e_block_size, e_block_size)); | |
| // For the current chunk compute and update the rhs of the reduced | |
| // linear system. | |
| // | |
| // rhs = F'b - F'E(E'E)^(-1) E'b | |
| FixedArray<double, 8> inverse_ete_g(e_block_size); | |
| MatrixVectorMultiply<kEBlockSize, kEBlockSize, 0>( | |
| inverse_ete.data(), | |
| e_block_size, | |
| e_block_size, | |
| g.get(), | |
| inverse_ete_g.get()); | |
| UpdateRhs(chunk, A, b, chunk.start, inverse_ete_g.get(), rhs); | |
| // S -= F'E(E'E)^{-1}E'F | |
| ChunkOuterProduct(bs, inverse_ete, buffer, chunk.buffer_layout, lhs); | |
| } | |
| // For rows with no e_blocks, the schur complement update reduces to | |
| // S += F'F. | |
| NoEBlockRowsUpdate(A, b, uneliminated_row_begins_, lhs, rhs); | |
| } | |
| template <int kRowBlockSize, int kEBlockSize, int kFBlockSize> | |
| void | |
| SchurEliminator<kRowBlockSize, kEBlockSize, kFBlockSize>:: | |
| BackSubstitute(const BlockSparseMatrix* A, | |
| const double* b, | |
| const double* D, | |
| const double* z, | |
| double* y) { | |
| const CompressedRowBlockStructure* bs = A->block_structure(); | |
| #pragma omp parallel for num_threads(num_threads_) schedule(dynamic) | |
| for (int i = 0; i < chunks_.size(); ++i) { | |
| const Chunk& chunk = chunks_[i]; | |
| const int e_block_id = bs->rows[chunk.start].cells.front().block_id; | |
| const int e_block_size = bs->cols[e_block_id].size; | |
| double* y_ptr = y + bs->cols[e_block_id].position; | |
| typename EigenTypes<kEBlockSize>::VectorRef y_block(y_ptr, e_block_size); | |
| typename EigenTypes<kEBlockSize, kEBlockSize>::Matrix | |
| ete(e_block_size, e_block_size); | |
| if (D != NULL) { | |
| const typename EigenTypes<kEBlockSize>::ConstVectorRef | |
| diag(D + bs->cols[e_block_id].position, e_block_size); | |
| ete = diag.array().square().matrix().asDiagonal(); | |
| } else { | |
| ete.setZero(); | |
| } | |
| const double* values = A->values(); | |
| for (int j = 0; j < chunk.size; ++j) { | |
| const CompressedRow& row = bs->rows[chunk.start + j]; | |
| const Cell& e_cell = row.cells.front(); | |
| DCHECK_EQ(e_block_id, e_cell.block_id); | |
| FixedArray<double, 8> sj(row.block.size); | |
| typename EigenTypes<kRowBlockSize>::VectorRef(sj.get(), row.block.size) = | |
| typename EigenTypes<kRowBlockSize>::ConstVectorRef | |
| (b + bs->rows[chunk.start + j].block.position, row.block.size); | |
| for (int c = 1; c < row.cells.size(); ++c) { | |
| const int f_block_id = row.cells[c].block_id; | |
| const int f_block_size = bs->cols[f_block_id].size; | |
| const int r_block = f_block_id - num_eliminate_blocks_; | |
| MatrixVectorMultiply<kRowBlockSize, kFBlockSize, -1>( | |
| values + row.cells[c].position, row.block.size, f_block_size, | |
| z + lhs_row_layout_[r_block], | |
| sj.get()); | |
| } | |
| MatrixTransposeVectorMultiply<kRowBlockSize, kEBlockSize, 1>( | |
| values + e_cell.position, row.block.size, e_block_size, | |
| sj.get(), | |
| y_ptr); | |
| MatrixTransposeMatrixMultiply | |
| <kRowBlockSize, kEBlockSize, kRowBlockSize, kEBlockSize, 1>( | |
| values + e_cell.position, row.block.size, e_block_size, | |
| values + e_cell.position, row.block.size, e_block_size, | |
| ete.data(), 0, 0, e_block_size, e_block_size); | |
| } | |
| ete.llt().solveInPlace(y_block); | |
| } | |
| } | |
| // Update the rhs of the reduced linear system. Compute | |
| // | |
| // F'b - F'E(E'E)^(-1) E'b | |
| template <int kRowBlockSize, int kEBlockSize, int kFBlockSize> | |
| void | |
| SchurEliminator<kRowBlockSize, kEBlockSize, kFBlockSize>:: | |
| UpdateRhs(const Chunk& chunk, | |
| const BlockSparseMatrix* A, | |
| const double* b, | |
| int row_block_counter, | |
| const double* inverse_ete_g, | |
| double* rhs) { | |
| const CompressedRowBlockStructure* bs = A->block_structure(); | |
| const int e_block_id = bs->rows[chunk.start].cells.front().block_id; | |
| const int e_block_size = bs->cols[e_block_id].size; | |
| int b_pos = bs->rows[row_block_counter].block.position; | |
| const double* values = A->values(); | |
| for (int j = 0; j < chunk.size; ++j) { | |
| const CompressedRow& row = bs->rows[row_block_counter + j]; | |
| const Cell& e_cell = row.cells.front(); | |
| typename EigenTypes<kRowBlockSize>::Vector sj = | |
| typename EigenTypes<kRowBlockSize>::ConstVectorRef | |
| (b + b_pos, row.block.size); | |
| MatrixVectorMultiply<kRowBlockSize, kEBlockSize, -1>( | |
| values + e_cell.position, row.block.size, e_block_size, | |
| inverse_ete_g, sj.data()); | |
| for (int c = 1; c < row.cells.size(); ++c) { | |
| const int block_id = row.cells[c].block_id; | |
| const int block_size = bs->cols[block_id].size; | |
| const int block = block_id - num_eliminate_blocks_; | |
| CeresMutexLock l(rhs_locks_[block]); | |
| MatrixTransposeVectorMultiply<kRowBlockSize, kFBlockSize, 1>( | |
| values + row.cells[c].position, | |
| row.block.size, block_size, | |
| sj.data(), rhs + lhs_row_layout_[block]); | |
| } | |
| b_pos += row.block.size; | |
| } | |
| } | |
| // Given a Chunk - set of rows with the same e_block, e.g. in the | |
| // following Chunk with two rows. | |
| // | |
| // E F | |
| // [ y11 0 0 0 | z11 0 0 0 z51] | |
| // [ y12 0 0 0 | z12 z22 0 0 0] | |
| // | |
| // this function computes twp matrices. The diagonal block matrix | |
| // | |
| // ete = y11 * y11' + y12 * y12' | |
| // | |
| // and the off diagonal blocks in the Guass Newton Hessian. | |
| // | |
| // buffer = [y11'(z11 + z12), y12' * z22, y11' * z51] | |
| // | |
| // which are zero compressed versions of the block sparse matrices E'E | |
| // and E'F. | |
| // | |
| // and the gradient of the e_block, E'b. | |
| template <int kRowBlockSize, int kEBlockSize, int kFBlockSize> | |
| void | |
| SchurEliminator<kRowBlockSize, kEBlockSize, kFBlockSize>:: | |
| ChunkDiagonalBlockAndGradient( | |
| const Chunk& chunk, | |
| const BlockSparseMatrix* A, | |
| const double* b, | |
| int row_block_counter, | |
| typename EigenTypes<kEBlockSize, kEBlockSize>::Matrix* ete, | |
| double* g, | |
| double* buffer, | |
| BlockRandomAccessMatrix* lhs) { | |
| const CompressedRowBlockStructure* bs = A->block_structure(); | |
| int b_pos = bs->rows[row_block_counter].block.position; | |
| const int e_block_size = ete->rows(); | |
| // Iterate over the rows in this chunk, for each row, compute the | |
| // contribution of its F blocks to the Schur complement, the | |
| // contribution of its E block to the matrix EE' (ete), and the | |
| // corresponding block in the gradient vector. | |
| const double* values = A->values(); | |
| for (int j = 0; j < chunk.size; ++j) { | |
| const CompressedRow& row = bs->rows[row_block_counter + j]; | |
| if (row.cells.size() > 1) { | |
| EBlockRowOuterProduct(A, row_block_counter + j, lhs); | |
| } | |
| // Extract the e_block, ETE += E_i' E_i | |
| const Cell& e_cell = row.cells.front(); | |
| MatrixTransposeMatrixMultiply | |
| <kRowBlockSize, kEBlockSize, kRowBlockSize, kEBlockSize, 1>( | |
| values + e_cell.position, row.block.size, e_block_size, | |
| values + e_cell.position, row.block.size, e_block_size, | |
| ete->data(), 0, 0, e_block_size, e_block_size); | |
| // g += E_i' b_i | |
| MatrixTransposeVectorMultiply<kRowBlockSize, kEBlockSize, 1>( | |
| values + e_cell.position, row.block.size, e_block_size, | |
| b + b_pos, | |
| g); | |
| // buffer = E'F. This computation is done by iterating over the | |
| // f_blocks for each row in the chunk. | |
| for (int c = 1; c < row.cells.size(); ++c) { | |
| const int f_block_id = row.cells[c].block_id; | |
| const int f_block_size = bs->cols[f_block_id].size; | |
| double* buffer_ptr = | |
| buffer + FindOrDie(chunk.buffer_layout, f_block_id); | |
| MatrixTransposeMatrixMultiply | |
| <kRowBlockSize, kEBlockSize, kRowBlockSize, kFBlockSize, 1>( | |
| values + e_cell.position, row.block.size, e_block_size, | |
| values + row.cells[c].position, row.block.size, f_block_size, | |
| buffer_ptr, 0, 0, e_block_size, f_block_size); | |
| } | |
| b_pos += row.block.size; | |
| } | |
| } | |
| // Compute the outer product F'E(E'E)^{-1}E'F and subtract it from the | |
| // Schur complement matrix, i.e | |
| // | |
| // S -= F'E(E'E)^{-1}E'F. | |
| template <int kRowBlockSize, int kEBlockSize, int kFBlockSize> | |
| void | |
| SchurEliminator<kRowBlockSize, kEBlockSize, kFBlockSize>:: | |
| ChunkOuterProduct(const CompressedRowBlockStructure* bs, | |
| const Matrix& inverse_ete, | |
| const double* buffer, | |
| const BufferLayoutType& buffer_layout, | |
| BlockRandomAccessMatrix* lhs) { | |
| // This is the most computationally expensive part of this | |
| // code. Profiling experiments reveal that the bottleneck is not the | |
| // computation of the right-hand matrix product, but memory | |
| // references to the left hand side. | |
| const int e_block_size = inverse_ete.rows(); | |
| BufferLayoutType::const_iterator it1 = buffer_layout.begin(); | |
| #ifdef CERES_USE_OPENMP | |
| int thread_id = omp_get_thread_num(); | |
| #else | |
| int thread_id = 0; | |
| #endif | |
| double* b1_transpose_inverse_ete = | |
| chunk_outer_product_buffer_.get() + thread_id * buffer_size_; | |
| // S(i,j) -= bi' * ete^{-1} b_j | |
| for (; it1 != buffer_layout.end(); ++it1) { | |
| const int block1 = it1->first - num_eliminate_blocks_; | |
| const int block1_size = bs->cols[it1->first].size; | |
| MatrixTransposeMatrixMultiply | |
| <kEBlockSize, kFBlockSize, kEBlockSize, kEBlockSize, 0>( | |
| buffer + it1->second, e_block_size, block1_size, | |
| inverse_ete.data(), e_block_size, e_block_size, | |
| b1_transpose_inverse_ete, 0, 0, block1_size, e_block_size); | |
| BufferLayoutType::const_iterator it2 = it1; | |
| for (; it2 != buffer_layout.end(); ++it2) { | |
| const int block2 = it2->first - num_eliminate_blocks_; | |
| int r, c, row_stride, col_stride; | |
| CellInfo* cell_info = lhs->GetCell(block1, block2, | |
| &r, &c, | |
| &row_stride, &col_stride); | |
| if (cell_info != NULL) { | |
| const int block2_size = bs->cols[it2->first].size; | |
| CeresMutexLock l(&cell_info->m); | |
| MatrixMatrixMultiply | |
| <kFBlockSize, kEBlockSize, kEBlockSize, kFBlockSize, -1>( | |
| b1_transpose_inverse_ete, block1_size, e_block_size, | |
| buffer + it2->second, e_block_size, block2_size, | |
| cell_info->values, r, c, row_stride, col_stride); | |
| } | |
| } | |
| } | |
| } | |
| // For rows with no e_blocks, the schur complement update reduces to S | |
| // += F'F. This function iterates over the rows of A with no e_block, | |
| // and calls NoEBlockRowOuterProduct on each row. | |
| template <int kRowBlockSize, int kEBlockSize, int kFBlockSize> | |
| void | |
| SchurEliminator<kRowBlockSize, kEBlockSize, kFBlockSize>:: | |
| NoEBlockRowsUpdate(const BlockSparseMatrix* A, | |
| const double* b, | |
| int row_block_counter, | |
| BlockRandomAccessMatrix* lhs, | |
| double* rhs) { | |
| const CompressedRowBlockStructure* bs = A->block_structure(); | |
| const double* values = A->values(); | |
| for (; row_block_counter < bs->rows.size(); ++row_block_counter) { | |
| const CompressedRow& row = bs->rows[row_block_counter]; | |
| for (int c = 0; c < row.cells.size(); ++c) { | |
| const int block_id = row.cells[c].block_id; | |
| const int block_size = bs->cols[block_id].size; | |
| const int block = block_id - num_eliminate_blocks_; | |
| MatrixTransposeVectorMultiply<Eigen::Dynamic, Eigen::Dynamic, 1>( | |
| values + row.cells[c].position, row.block.size, block_size, | |
| b + row.block.position, | |
| rhs + lhs_row_layout_[block]); | |
| } | |
| NoEBlockRowOuterProduct(A, row_block_counter, lhs); | |
| } | |
| } | |
| // A row r of A, which has no e_blocks gets added to the Schur | |
| // Complement as S += r r'. This function is responsible for computing | |
| // the contribution of a single row r to the Schur complement. It is | |
| // very similar in structure to EBlockRowOuterProduct except for | |
| // one difference. It does not use any of the template | |
| // parameters. This is because the algorithm used for detecting the | |
| // static structure of the matrix A only pays attention to rows with | |
| // e_blocks. This is becase rows without e_blocks are rare and | |
| // typically arise from regularization terms in the original | |
| // optimization problem, and have a very different structure than the | |
| // rows with e_blocks. Including them in the static structure | |
| // detection will lead to most template parameters being set to | |
| // dynamic. Since the number of rows without e_blocks is small, the | |
| // lack of templating is not an issue. | |
| template <int kRowBlockSize, int kEBlockSize, int kFBlockSize> | |
| void | |
| SchurEliminator<kRowBlockSize, kEBlockSize, kFBlockSize>:: | |
| NoEBlockRowOuterProduct(const BlockSparseMatrix* A, | |
| int row_block_index, | |
| BlockRandomAccessMatrix* lhs) { | |
| const CompressedRowBlockStructure* bs = A->block_structure(); | |
| const CompressedRow& row = bs->rows[row_block_index]; | |
| const double* values = A->values(); | |
| for (int i = 0; i < row.cells.size(); ++i) { | |
| const int block1 = row.cells[i].block_id - num_eliminate_blocks_; | |
| DCHECK_GE(block1, 0); | |
| const int block1_size = bs->cols[row.cells[i].block_id].size; | |
| int r, c, row_stride, col_stride; | |
| CellInfo* cell_info = lhs->GetCell(block1, block1, | |
| &r, &c, | |
| &row_stride, &col_stride); | |
| if (cell_info != NULL) { | |
| CeresMutexLock l(&cell_info->m); | |
| // This multiply currently ignores the fact that this is a | |
| // symmetric outer product. | |
| MatrixTransposeMatrixMultiply | |
| <Eigen::Dynamic, Eigen::Dynamic, Eigen::Dynamic, Eigen::Dynamic, 1>( | |
| values + row.cells[i].position, row.block.size, block1_size, | |
| values + row.cells[i].position, row.block.size, block1_size, | |
| cell_info->values, r, c, row_stride, col_stride); | |
| } | |
| for (int j = i + 1; j < row.cells.size(); ++j) { | |
| const int block2 = row.cells[j].block_id - num_eliminate_blocks_; | |
| DCHECK_GE(block2, 0); | |
| DCHECK_LT(block1, block2); | |
| int r, c, row_stride, col_stride; | |
| CellInfo* cell_info = lhs->GetCell(block1, block2, | |
| &r, &c, | |
| &row_stride, &col_stride); | |
| if (cell_info != NULL) { | |
| const int block2_size = bs->cols[row.cells[j].block_id].size; | |
| CeresMutexLock l(&cell_info->m); | |
| MatrixTransposeMatrixMultiply | |
| <Eigen::Dynamic, Eigen::Dynamic, Eigen::Dynamic, Eigen::Dynamic, 1>( | |
| values + row.cells[i].position, row.block.size, block1_size, | |
| values + row.cells[j].position, row.block.size, block2_size, | |
| cell_info->values, r, c, row_stride, col_stride); | |
| } | |
| } | |
| } | |
| } | |
| // For a row with an e_block, compute the contribition S += F'F. This | |
| // function has the same structure as NoEBlockRowOuterProduct, except | |
| // that this function uses the template parameters. | |
| template <int kRowBlockSize, int kEBlockSize, int kFBlockSize> | |
| void | |
| SchurEliminator<kRowBlockSize, kEBlockSize, kFBlockSize>:: | |
| EBlockRowOuterProduct(const BlockSparseMatrix* A, | |
| int row_block_index, | |
| BlockRandomAccessMatrix* lhs) { | |
| const CompressedRowBlockStructure* bs = A->block_structure(); | |
| const CompressedRow& row = bs->rows[row_block_index]; | |
| const double* values = A->values(); | |
| for (int i = 1; i < row.cells.size(); ++i) { | |
| const int block1 = row.cells[i].block_id - num_eliminate_blocks_; | |
| DCHECK_GE(block1, 0); | |
| const int block1_size = bs->cols[row.cells[i].block_id].size; | |
| int r, c, row_stride, col_stride; | |
| CellInfo* cell_info = lhs->GetCell(block1, block1, | |
| &r, &c, | |
| &row_stride, &col_stride); | |
| if (cell_info != NULL) { | |
| CeresMutexLock l(&cell_info->m); | |
| // block += b1.transpose() * b1; | |
| MatrixTransposeMatrixMultiply | |
| <kRowBlockSize, kFBlockSize, kRowBlockSize, kFBlockSize, 1>( | |
| values + row.cells[i].position, row.block.size, block1_size, | |
| values + row.cells[i].position, row.block.size, block1_size, | |
| cell_info->values, r, c, row_stride, col_stride); | |
| } | |
| for (int j = i + 1; j < row.cells.size(); ++j) { | |
| const int block2 = row.cells[j].block_id - num_eliminate_blocks_; | |
| DCHECK_GE(block2, 0); | |
| DCHECK_LT(block1, block2); | |
| const int block2_size = bs->cols[row.cells[j].block_id].size; | |
| int r, c, row_stride, col_stride; | |
| CellInfo* cell_info = lhs->GetCell(block1, block2, | |
| &r, &c, | |
| &row_stride, &col_stride); | |
| if (cell_info != NULL) { | |
| // block += b1.transpose() * b2; | |
| CeresMutexLock l(&cell_info->m); | |
| MatrixTransposeMatrixMultiply | |
| <kRowBlockSize, kFBlockSize, kRowBlockSize, kFBlockSize, 1>( | |
| values + row.cells[i].position, row.block.size, block1_size, | |
| values + row.cells[j].position, row.block.size, block2_size, | |
| cell_info->values, r, c, row_stride, col_stride); | |
| } | |
| } | |
| } | |
| } | |
| } // namespace internal | |
| } // namespace ceres | |
| #endif // CERES_INTERNAL_SCHUR_ELIMINATOR_IMPL_H_ |